Category:Hull Maintenance Technician (United States Navy)

Hull Maintenance Technician

Upload media

Location

United States of America

Authority file
Q5935939
Reasonator Scholia Wikidocumentaries PetScan statistics WikiMap Locator tool KML file Search depicted

Subcategories

This category has only the following subcategory.

H

Neil Hopkins‎ (5 F)

Media in category "Hull Maintenance Technician (United States Navy)"

The following 200 files are in this category, out of 240 total.

(previous page) (next page)

US Navy 020507-N-2732S-001 Norfolk NS - Cole license plate.jpg 2,048 × 1,536; 969 KB
200915-N-UF271-0127 - M9.jpg 4,510 × 3,007; 1.09 MB
230518-N-FO714-1152.jpg 5,385 × 4,108; 1.43 MB
US Navy 031022-N-4048T-100 Hull Maintenance Technician 3rd Class Jonathan Baker collects Aqueous Film Forming Foam (AFFF) samples from the flight deck of USS Kearsarge during a test activation for the amphibious assault ship's.jpg 2,100 × 1,500; 3.55 MB
Brazing aboard USS Ashland (48490045652).jpg 4,877 × 3,902; 1.7 MB
Convincer DVIDS72254.jpg 2,000 × 3,008; 3.36 MB
Defense.gov News Photo 060403-N-7711S-126.jpg 2,464 × 1,632; 1.53 MB
US Navy 031208-N-9392E-010 Hull Maintenance Technician 3rd Class Billy Hamilton cuts some pipe that he's using to repair a shipboard sink on the Seventh Fleet Command Ship, USS Blue Ridge (LCC 19).jpg 1,500 × 2,100; 354 KB
U.S. Navy Damage Controlman 3rd Class Carson Seitz and Hull Maintenance Technician 3rd Class Travis Cole approach a CH-46 Sea Knight helicopter to simulate rescuing an injured aircrewman during flight deck 130510-N-DR144-518.jpg 2,700 × 1,746; 656 KB
U.S. Navy Damage Controlman 3rd Class Carson Seitz and Hull Maintenance Technician 3rd Class Travis Cole approach the scene to simulate rescuing an injured aircrewman during flight deck drills aboard 130510-N-DR144-189.jpg 2,700 × 1,797; 926 KB
U.S. Navy Damage Controlman 3rd Class Carson Seitz and Hull Maintenance Technician 3rd Class Travis Cole enter a CH-46 Sea Knight helicopter to simulate rescuing an injured aircrewman during flight deck drills 130510-N-DR144-401.jpg 2,700 × 1,797; 812 KB
US Navy 020701-N-3725V-001 Master Chief Scott Heineman.jpg 1,500 × 2,100; 2 MB
US Navy 020717-N-0331L-004 Monitor salvage and recovery.jpg 3,000 × 2,400; 3.25 MB
US Navy 020724-N-1280S-002 Welder works aboard ship.jpg 1,500 × 2,100; 1.45 MB
US Navy 021104-N-0685W-008 Damage control leader during a General Quarters (GQ) drill, checks a space for potential reflash fires using a thermal imager.jpg 1,312 × 2,000; 1.26 MB
US Navy 030220-N-5786V-506 Hull Maintenance Technician 3rd Class Erich Caudell from Jarrettsville, Md., uses a pee grinder in the sheet metal shop aboard USS Theodore Roosevelt (CVN 71).jpg 2,100 × 1,500; 1.68 MB
US Navy 030311-N-4154B-507 Hull Maintenance Technician 2nd Class Israel Colon and Hull Maintenance Technician Fireman John Tuggle sand a piece of wood in the carpentry shop aboard USS Theodore Roosevelt (CVN 71).jpg 2,100 × 1,500; 419 KB
US Navy 030314-N-4048T-092 Hull Maintenance Technician 1st Class John Gombar, a member of the ship's Damage Control Training Team, conducts a main engineering space fire drill.jpg 2,100 × 1,500; 3.39 MB
US Navy 030918-N-4616B-016 Hull Maintenance Technician Fireman Dustin Brant considers an answer.jpg 3,008 × 1,960; 817 KB
US Navy 030923-N-2143T-003 Hull Maintenance Technician 3rd Class Kevin Kalin from Denver, Colo., uses a wrench to perform repairs.jpg 2,287 × 1,500; 1.07 MB
US Navy 030930-N-8955H-007 Maintenance Technician 2nd Class Joseph Marcotte, from Loveland, Colo., updates the Damage Control Central status board.jpg 2,100 × 1,500; 795 KB
US Navy 031015-N-8955H-004 Lt. Cmdr. Michael Curtis from Congview, Wash., briefs Hull Maintenance Technician Fireman Jacob Styron.jpg 2,100 × 1,500; 736 KB
US Navy 031021-N-8955H-003 Sailors are training on how to use the Naval Firefighting Thermal Imager (NFTI) during a General Quarters training drill aboard USS Blue Ridge (LCC 19).jpg 2,421 × 1,729; 971 KB
US Navy 040120-N-7912E-001 Hull Maintenance Technician 3rd Class John K. Caroon, from Newark, Ohio, welds.jpg 2,100 × 1,500; 321 KB
US Navy 040128-N-9288T-109 Hull Maintenance Technician Fireman Greg Meadows, from Louisville, Ky., uses a cutting tool on the fantail.jpg 1,312 × 2,000; 1.29 MB
US Navy 040130-N-5576W-003 Recruit Division Commander (RDC) Hull Maintenance Technician 1st Class Duane Dominick practices being the jackman prior to the pit stop competition.jpg 2,100 × 1,500; 1.76 MB
US Navy 040219-N-0685W-005 Hull Maintenance Technician 3rd Class Adam Welchel, of Oklahoma City, Okla., brazes a joint for an external drain.jpg 2,000 × 1,312; 592 KB
US Navy 040220-N-8197M-002 Hull Maintenance Technician Fireman Clifford Salvatore, of Flat Rock, Mich., welds safety rails in the engineering spaces aboard the amphibious command ship USS La Salle (AGF 3).jpg 1,632 × 2,464; 2.02 MB
US Navy 040220-N-8197M-003 Hull Maintenance Technician Fireman Clifford Salvatore, of Flat Rock, Mich., installs safety rails in the engineering spaces aboard the amphibious command ship USS La Salle (AGF 3).jpg 2,464 × 1,632; 1.84 MB
US Navy 040225-N-8197M-002 Hull Maintenance Technician 2nd Class Marc J. Scillieri, of Glendale Ariz., makes final adjustments to his MK-20 Light Weight Diving Mask.jpg 1,600 × 2,216; 1.69 MB
US Navy 040225-N-8197M-003 Hull Maintenance Technician 2nd Class Marc J. Scillieri, of Glendale Ariz., tightens the straps on his MK-20 Light Weight Diving Mask.jpg 2,100 × 1,936; 2.02 MB
US Navy 040311-N-3707B-001 Gunner's Mate 3rd Class Ryan Griggs steadies a fastener while conducting repairs on a Los-Angles-class fast attack submarine deployed to Guam.jpg 1,575 × 2,100; 280 KB
US Navy 040324-N-2115M-012 Hull Maintenance Technician 2nd Class Micah Roach sits in a boatswain's chair while he welds a hinge bracket for a safety net on the flight deck of the guided missile frigate USS Ingraham (FFG-61).jpg 3,008 × 2,000; 3.45 MB
US Navy 040324-N-2115M-040 Hull Maintenance Technician 2nd Class Micah Roach sits in a boatswain's chair while he welds a hinge bracket for a safety net on the flight deck of the guided missile frigate USS Ingraham (FFG-61).jpg 2,000 × 3,008; 3.48 MB
US Navy 040329-N-3874J-001 Hull Maintenance Technician Fireman Joshua Lieder, of Chandler, Ariz., uses a plasma cutter to slice through sheets of aluminum aboard the Whidbey Island-class amphibious assault ship USS Comstock (LS.jpg 1,312 × 2,000; 1.87 MB
US Navy 040403-N-1082Z-093 Damage Controlman 1st Class Louis Cragg, of Casper, Wyo., and Hull Maintenance Technician 3rd Class Robert Randall, of Beallsville, Ohio, guide a mannequin through an escape trunk during a deep void r.jpg 1,368 × 2,100; 1.67 MB
US Navy 040413-N-5821P-002 Hull Maintenance Technician Fireman Earl Perkins, of Huffman, Texas, relaxes his gas mask during a chemical, biological, radiation (CBR) general quarters (GQ) drill.jpg 3,008 × 1,960; 4.37 MB
US Navy 040421-N-7586B-010 Hull Maintenance Technician 2nd Class Valach, assigned to Special Boat Team Twelve (SBT-12), pilots a Rigid Hull Inflatable Boat (RHIB).jpg 3,008 × 1,960; 906 KB
US Navy 040428-N-2819P-037 Fire party team member, Hull Technician Fireman Josh C. Musser, of Naukati, Alaska, fights a mock class bravo fire.jpg 2,100 × 1,500; 163 KB
US Navy 040601-N-5663H-011 Hull Maintenance Technician Fireman Kenneth Atkins uses one of the various metal cutting tools used during damage control operations aboard USS Fort McHenry (LSD 43).jpg 2,040 × 1,530; 690 KB
US Navy 040609-N-7748K-005 Hull Maintenance Technician 2nd Class Chris Vilones, of Sacramento, Calif., performs shielded metal arc welding on a bracket to be used on an oxygen tank rack aboard the aircraft carrier USS Enterpris.jpg 1,500 × 2,100; 2.25 MB
US Navy 040614-N-3874J-001 Hull Maintenance Technician 2nd Class John Lemay, of Pachogue, N.Y., braises a pipe aboard the Ticonderoga-class guided missile cruiser USS Mobile Bay (CG 53).jpg 1,312 × 1,678; 2.12 MB
US Navy 040625-N-5952R-027 Hull Maintenance Technician Fireman Jeremy Critchlow, from Huntsville, Texas, and Boatswain's Mate 3rd Class Russell Crain, from Fort Worth, Texas, assigned to USS Enterprise (CVN 65), prepare to figh.jpg 2,100 × 1,500; 2.56 MB
US Navy 040630-N-2788L-046 Hull Maintenance Technician 3rd Class Randy McCleod, of Warrenton, Miss., prepares a Mark-16 Underwater Breathing Apparatus.jpg 2,100 × 1,500; 844 KB
US Navy 040708-N-2115M-100 Hull Maintenance Technician 3rd Class Bryan Smith assigned to the Intermediate Maintenance Facility (IMF) Detachment, Naval Station Everett shapes parts out of metal with a cutting torch.jpg 3,008 × 2,000; 3.49 MB
US Navy 040708-N-6811L-045 Hull Maintenance Technician 2nd Class Josh Lamb, assigned to Mobile Diving Salvage Unit One (MDSU-1), calculates the burn duration of a length of time fuse.jpg 1,312 × 2,000; 287 KB
US Navy 040708-N-6811L-068 Machinist's Mate 3rd Class Jeff Nodine, Engineman 2nd Class Mike Hordinski and Hull Maintenance Technician 2nd Class Richard Buschner pack C-4 explosive material into a MK-1 cable and chain cutter.jpg 1,312 × 2,000; 298 KB
US Navy 040708-N-6811L-177 Hull Maintenance Technician 2nd Class Josh Lamb, assigned to Mobile Diving Salvage Unit One (MDSU-1), cuts a length of explosive cutting tape used to cut shapes and contours.jpg 1,960 × 3,008; 553 KB
US Navy 040716-N-6811L-182 Boatswain's Mate 2nd Class Jack McPherson performs a leak check on the MK-21 Underwater Breathing Apparatus worn by Hull Maintenance Technician 2nd Class Jody Kappen aboard USNS Sioux (T-ATF 171).jpg 2,000 × 1,312; 625 KB
US Navy 040716-N-6811L-209 Navy Diver, Hull Maintenance Technician 1st Class Rick Pelton, assigned to Mobile Diving Salvage Unit One (MDSU-1), signals the winch operator aboard USNS Sioux (T-ATF 171).jpg 2,000 × 1,312; 660 KB
US Navy 040716-N-6811L-291 Hull Maintenance Technician 2nd Class Justin Culver, a Navy Diver assigned to Mobile Diving Salvage Unit One (MDSU-1), exits the Transportable Recompression Chamber System.jpg 1,312 × 2,000; 512 KB
US Navy 040721-N-0535P-016 Hull Maintenance Technician Fireman Darrell Brooks, assigned to the Engineering Department's Repair Division, replaces the fittings on a reducing station below decks aboard USS Harry S. Truman (CVN 75.jpg 2,100 × 1,500; 661 KB
US Navy 040802-N-7034S-002 Hull Maintenance Technician 2nd Class Michael Hale mans a .50 caliber assault rifle on a harbor patrol craft in the Manama, Bahrain harbor while USS John F. Kennedy (CV 67) prepares to drop anchor.jpg 2,100 × 1,500; 2.59 MB
US Navy 040915-N-0683J-045 Hull Maintenance Technician 2nd Class Chris Chapell, assigned to Port Operations, Naval Station Everett, welds an aluminum bracket to hold propane tanks on Navy police vessels.jpg 2,332 × 1,551; 4.57 MB
US Navy 041026-N-3228G-002 Hull Maintenance Technician 1st Class Martin Mantz of Center, N.D., left, and Hull Maintenance Technician 2nd Class Gary Chavez of Portage, Ind., talk to reporters at a press conference about their re.jpg 2,250 × 1,500; 971 KB
US Navy 041026-N-6495K-056 Hull Maintenance Technician Fireman Ryan Cannon welds together metal for a project in his shop aboard the Nimitz-class aircraft carrier USS Harry S. Truman (CVN 75).jpg 1,500 × 2,100; 612 KB
US Navy 041029-N-6125G-011 Hull Maintenance Technician Fireman Cory Petersen welds a bracket used to support a television, aboard the Nimitz-class aircraft carrier USS Harry S. Truman (CVN-75).jpg 2,000 × 1,312; 526 KB
US Navy 041116-N-5345W-153 Hull Maintenance Technician 2nd Class Aaron Edmonds assigned to Explosive Ordnance Disposal Mobile Unit Six (EODMU-6), Detachment Ten, sights his target through the scope of his M4-A1 assault rifle.jpg 2,100 × 1,500; 649 KB
US Navy 041203-N-5154G-059 A Hull Maintenance Technician 3rd Class Petty Officer, assigned to the Engineering Department's Repair Division, fabricates a metal star for the holiday tree aboard USS Dwight D. Eisenhower (CVN 69).jpg 2,240 × 1,488; 621 KB
US Navy 041228-N-7816R-002 Hull Maintenance Technician 2nd Class David Luper of Gerome, Idaho, uses a clap to hold a organizer together prior to welding it aboard the aircraft carrier USS Abraham Lincoln (CVN 72).jpg 2,100 × 1,500; 186 KB
US Navy 041228-N-7816R-030 Hull Maintenance Technician 2nd Class David Luper of Gerome, Idaho, uses a Tig Welder to weld an organizer together aboard the aircraft carrier USS Abraham Lincoln (CVN 72).jpg 1,500 × 2,100; 156 KB
US Navy 050105-N-4383M-019 Hull Maintenance Technician 1st Class Jason Curry of Freemont, Iowa, prepares to test a fresh water distribution manifold on the flight deck aboard the amphibious assault ship USS Bonhomme Richard (LH.jpg 1,813 × 1,295; 1.28 MB
US Navy 050105-N-4383M-028 Hull Maintenance Technician Fireman Dennis J. Walsh of Grants Pass, Ore., prepares to test a fresh water distribution manifold on the flight deck aboard the amphibious assault ship USS Bonhomme Richa.jpg 1,312 × 2,000; 1.23 MB
US Navy 050105-N-4383M-039 Hull Maintenance Technician 1st Class Jason Curry, left, and Hull Maintenance Technician 3rd Class Branden Stone, prepare to test a fresh water distribution manifold.jpg 2,000 × 1,312; 1.46 MB
US Navy 050105-N-4383M-043 Hull Maintenance Technician 1st Class Jason Curry, left, and Hull Maintenance Technician 3rd Class Branden Stone, test a fresh water distribution manifold.jpg 2,100 × 1,500; 1.66 MB
US Navy 050114-N-8148A-646 Hull Maintenance Technician 1st Class Chip Land, of Boulder, Colo., left, heats-up a nut on a steam coil with a blow torch while Hull Maintenance Technician 3rd Class Jason Roosien, of Grand Rapids, M.jpg 2,000 × 1,312; 1.13 MB
US Navy 050114-N-8148A-651 Machinist's Mate Fireman Roy Leneave, left, of Salem, Va., tightens his grip on a 24.jpg 2,000 × 1,312; 1.1 MB
US Navy 050308-N-1485H-062 Hull Maintenance Technician 2nd Class Benjamin Bates of Cabot, Ark., practices arc welding pipes together inside the Pipe Shop aboard the conventionally powered aircraft carrier USS Kitty Hawk (CV 63).jpg 2,464 × 1,632; 312 KB
US Navy 050327-N-6125G-057 Hull Maintenance Technician 3rd Class Alex Wilburn uses a lathe to fashion a block of wood into a candleholder in the wood shop aboard the Nimitz-class aircraft carrier USS Harry S. Truman (CVN 75).jpg 1,500 × 2,100; 627 KB
US Navy 050419-N-1063M-003 Hull Maintenance Technician 3rd Class Mike Bryant, assigned to the Engineering Department aboard the Nimitz-class aircraft carrier USS Dwight D. Eisenhower (CVN 69), welds electrical boxes.jpg 1,680 × 2,100; 372 KB
US Navy 050510-N-4309A-011 Hull Maintenance Technician 2nd Class Carl Harris, left, assembles demolition charges as Chief Electronics Technician Richard Straney supervises to ensure the proper procedure is followed.jpg 1,504 × 980; 294 KB
US Navy 050510-N-4309A-061 Hull Maintenance Technician 2nd Class Carl Harris, left, waits patiently as Chief Electronics Technician Ronald Olmsted assembles his bomb suit during a training evolution in Bahrain.jpg 1,504 × 980; 216 KB
US Navy 050510-N-4309A-087 Hull Maintenance Technician 2nd Class Carl Harris inspects the remaining high explosive material from a disrupted improvised explosive device during a training exercise in Bahrain.jpg 1,504 × 980; 403 KB
US Navy 050510-N-4309A-114 Hull Maintenance Technician 2nd Class Carl Harris inspects the remaining high explosive material from a disrupted improvised explosive device during a training exercise in Bahrain.jpg 1,504 × 980; 346 KB
US Navy 050531-N-8921O-001 Master Chief Hull Maintenance Technician Leon Ford takes a look out the cabin door of a UH-3H Sea King helicopter to locate his target drop zone before jumping.jpg 2,100 × 1,500; 1.36 MB
US Navy 050531-N-8921O-002 Master Chief Hull Maintenance Technician Leon Ford, foreground, and Aviation Boatswains Mate 1st Class Roger Miracle jump out of a UH-3H Sea King helicopter from 10,000 feet during a training jump ove.jpg 1,500 × 2,100; 1.7 MB
US Navy 050610-N-2385R-087 - Information Systems Technician 2nd Class Aaron Scrimager returns to the dive boat after successfully completing a diving evolution.jpg 1,500 × 2,100; 781 KB
US Navy 050710-N-7130B-159 Hull Maintenance Technician 3rd Class Justin Barker, left, and Hull Maintenance Technician Fireman Joe Vanhorn use a torch to heat a length of steel.jpg 1,720 × 1,268; 1.15 MB
US Navy 050713-N-3143M-025 Hull Maintenance Technician Fireman Oran Rundberg welds together piping in the machine shop aboard the Nimitz-class aircraft carrier USS Harry S. Truman (CVN 75).jpg 1,366 × 1,168; 554 KB
US Navy 050726-N-7130B-120 Hull Maintenance Technician 3rd Class Brooks Hagel braises a pipe fitting in the pipe shop on board the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76).jpg 2,000 × 1,312; 382 KB
US Navy 050817-N-4772B-016 Hull Maintenance Technician 3rd Class Zachary D. Dimare, left, helps a Philippine Navy diver prepare his gear aboard the rescue and salvage ship USS Safeguard (ARS 50).jpg 1,500 × 2,100; 360 KB
US Navy 051019-N-2103B-001 Hull Maintenance Technician 2nd Class Thomas Aloisi, from Knoxville, Tenn., inspects a cuplink pipe as part of preventative maintenance.jpg 1,500 × 2,256; 299 KB
US Navy 051026-N-3729H-145 U.S. Navy Electricians Mate 2nd Class Jamie Herrington and Hull Maintenance Technician Fireman Ramon Linder, both assigned to the Nimitz-class aircraft carrier USS John C. Stennis (CVN 74), help civil.jpg 1,500 × 1,200; 258 KB
US Navy 051102-N-2209D-025 Hull Maintenance Technician Fireman Justin R. Winders of Olympia, Wash., welds a piece of angle iron.jpg 1,857 × 2,532; 599 KB
US Navy 051118-N-5832A-002 Hull Maintenance Technician 3rd Class Nestor Amaya of Bronx, New York, performs maintenance on a deep sink plumb vent in the pipe shop aboard the Nimitz-class aircraft carrier USS Theodore Roosevelt (.jpg 2,000 × 1,312; 1.06 MB
US Navy 051208-N-9641C-003 Hull Maintenance Technician Fireman Todd Goodrich lights a brazing torch in preparation of welding pipes together in the sheet metal shop aboard the Nimitz-class aircraft carrier USS Dwight D. Eisenho.jpg 2,100 × 1,500; 397 KB
US Navy 051215-N-7130B-027 Hull Maintenance Technician 2nd Class Matthew Stephens uses a vertical band saw to cut a piece of wood in the machine shop aboard the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76).jpg 1,470 × 1,065; 1.07 MB
US Navy 060113-N-3946H-029 Hull Maintenance Technician Fireman Dave Norris, sets the pressure of an oxygen tank prior to using an oxyacetylene torch.jpg 3,008 × 2,000; 646 KB
US Navy 060119-N-2736O-002 Retired Senior Chief Storekeeper Michael F. Snyder sits on the flight deck aboard the amphibious transport dock ship.jpg 2,544 × 1,696; 651 KB
US Navy 060222-N-3527B-071 Hull Maintenance Technician 2nd Class Justin H. Wilkerson repairs a pnuematic air gun accessory aboard amphibious assault ship USS Wasp (LHD 1).jpg 1,500 × 2,100; 482 KB
US Navy 060315-N-7981E-035 Fire party members help Hull Maintenance Technician 2nd Class Holly Gardner to safety, during general quarters (GQ) drill.jpg 2,100 × 1,500; 548 KB
US Navy 060403-N-7711S-126 Hull Maintenance Technician 3rd Class Ryan Rousseau works on a steel bracket for a mounting board in the repair shop aboard the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76).jpg 2,464 × 1,632; 867 KB
US Navy 060405-N-4133B-126 Hull Maintenance Technician Fireman Jayson Minor assigned aboard the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76) brazes tubing in the ship's pipe shop.jpg 1,960 × 3,008; 1.07 MB
US Navy 060405-N-4776G-173 Damage Control (DC) Repair Locker Leader, Senior Chief Hull Maintenance Technician Frank Furry, lends his knowledge of plotting to Photographer's Mate 3rd Class Aaron Burden.jpg 2,000 × 1,312; 1.18 MB
US Navy 060411-N-4772B-036 Electronics Technician 3rd Class Julian Ayala and Hull Maintenance Technician Fireman Michael D. Elliott conduct firefighting efforts during a crash and smash drills.jpg 2,100 × 1,405; 536 KB
US Navy 060411-N-4772B-040 Hull Maintenance Technician 3rd Class Joel Weiss mans an Aqueous Film Forming Foam (AFFF) hose with other flight deck personnel during a crash and smash drill.jpg 2,100 × 1,405; 511 KB
US Navy 060522-N-7949H-002 A rigid hull inflatable boat (RHIB) from the guided-missile cruiser USS Vella Gulf (CG 72) prepares to come alongside the ship with two Dutch crewmen rescued from a sailboat in distress.jpg 960 × 691; 213 KB
US Navy 060522-N-7949H-004 A rigid hull inflatable boat (RHIB) from the Norfolk-based guided missile cruiser USS Vella Gulf (CG 72) returns to a disabled sailboat after rescuing two Dutch crew members.jpg 960 × 532; 163 KB
US Navy 060528-N-1332Y-022 Hull Maintenance Technician Fireman Bob Chambers uses a brazing torch to weld a one-and-a-half-inch copper-nickel pipe in the pipe shop aboard USS Kitty Hawk (CV 63).jpg 3,008 × 2,000; 428 KB
US Navy 061021-N-0685C-005 Hull Maintenance Technician Fireman James Sawyer of Sulphur Springs, Texas, brazes a fitting pipe from a heat exchange aboard USS Theodore Roosevelt (CVN 71).jpg 3,008 × 1,960; 783 KB
US Navy 061021-N-2908M-005 Hull Maintenance Technician Fireman James Sawyer from Sulphur Springs, Texas, brazes a heat exchanger for a reactor aboard USS Theodore Roosevelt (CVN 71).jpg 3,008 × 2,000; 787 KB
US Navy 061027-N-8119R-159 Hull Maintenance Technician 3rd Class Jeremy Hanel uses a cutting torch to cut apart old shelving aboard the nuclear-powered aircraft carrier USS Nimitz (CVN 68).jpg 3,008 × 2,000; 865 KB
US Navy 061109-N-9708H-010 Machinist's Mate Fireman Kris Hale, left, and Hull Maintenance Technician 2nd Class Troy Dowell, enrolled in the Second Class Diver Course brace each other as they are raised out of the water a.jpg 2,848 × 4,288; 1.74 MB
US Navy 061110-N-7130B-181 Hull Maintenance Technician Fireman Sam Delaney from Wellington, Colo., uses a grinder to smooth the weld on a freshly fabricated support stand in the weld booth on board USS Ronald Reagan (CVN 76).jpg 2,000 × 1,312; 898 KB
US Navy 061127-N-8923M-039 Hull Maintenance Technician Fireman Justin Taylor cuts metal to clear space on board USS Harry S. Truman (CVN 75).jpg 1,379 × 2,100; 466 KB
US Navy 070103-N-3285B-051 Hull Technician 2nd Class Christopher French and Mervin Bailey inspect welds on an expansion bellows that they are repairing for the guided-missile cruiser USS Hue City (CG 66).jpg 2,100 × 1,500; 704 KB
US Navy 070123-N-4940H-001 Hull Maintenance Technician 3rd Class Peter Solomon welds a television bracket together in the Machine Shop aboard the Nimitz-class aircraft carrier USS John C. Stennis (CVN 74).jpg 2,464 × 1,632; 441 KB
US Navy 070202-N-0000M-027 Chief petty officers assigned to submarine tender USS Frank Cable (AS 40) participate in a team-building.jpg 666 × 933; 265 KB
US Navy 070202-N-0535P-023 Hull Maintenance Technician 2nd Class Eryk Grenier receives his Honorable Discharge certificate from Chief Engineer Cmdr. Michael Kinsey while reenlisting in an SH-60 Seahawk.jpg 2,100 × 1,500; 669 KB
US Navy 070206-N-0577G-029 Hull Maintenance Technician 1st Class William E. Schweikert applies a pipe patch to a training aid.jpg 2,100 × 1,500; 403 KB
US Navy 070206-N-9712C-001 Hull Maintenance Technician 3rd Class Justin Winders and Hull Maintenance Technician Fireman Daniel Schafer, stationed aboard Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76), weld together a.jpg 2,000 × 1,312; 346 KB
US Navy 070403-N-0486G-004 Hull Technician 2nd Class Adam Yung welds support to an aluminum plate.jpg 2,100 × 1,500; 1.8 MB
US Navy 070406-N-1635S-002 Hull Maintenance Technician Fireman Jeffrey Hansen, from Redding, Calif., uses a grinder on a J-hook used in ladder wells on board USS Ronald Reagan (CVN 76).jpg 3,008 × 2,000; 1.51 MB
US Navy 070412-N-8909B-010 Hull Maintenance Technician 2nd Class Cory West, a native of Seligman, Ariz., cuts a steel plate to make an electrical mounting bracket aboard USS Bonhomme Richard (LHD 6).jpg 2,100 × 1,500; 731 KB
US Navy 070423-N-7981E-096 Hull Maintenance Technician 3rd Class Jeffrey Goodwin uses a plasma cutter to cut flanges for a pressure relief valve aboard Nimitz-class aircraft carrier USS Abraham Lincoln (CVN 72).jpg 1,500 × 2,100; 856 KB
US Navy 070514-N-2659P-144 Hull Technician Fireman Noah Rodriguez, left, performs tool maintenance while Hull Technician Fireman Zach Carver, center, assists Hull Technician Fireman Keir Burnette with brazing.jpg 3,872 × 2,592; 1.66 MB
US Navy 070514-N-5248R-008 Hull Maintenance Technician 2nd Class Joseph Elrod of Odessa, Texas uses a new Pullmax to reshapes a piece of metal aboard USS Theodore Roosevelt (CVN 71).jpg 1,800 × 1,200; 657 KB
US Navy 070612-N-9760Z-015 Hull Maintenance Technician 3rd Class William Clark welds a metal frame in the machinery shop aboard nuclear-powered aircraft carrier USS Nimitz (CVN 68).jpg 3,008 × 2,000; 957 KB
US Navy 070625-N-1994L-068 Hull Maintenance Technician 2nd Class Cory West manufactures a valve cover for the main machinery room aboard amphibious assault ship USS Bonhomme Richard (LHD 6).jpg 2,100 × 1,500; 474 KB
US Navy 070703-N-6536T-001 Hull Maintenance Technician 2nd Class Sheldon James, of Godley, Texas, assigned to guided-missile frigate USS Rentz (FFG 46), explains fire fighting fundamentals to a sea cadets.jpg 3,872 × 2,592; 1.02 MB
US Navy 070714-N-1994L-033 Hull Maintenance Technician 1st Class Jonathan Wagner demonstrates how to apply a banding patch to a ruptured pipe during repair locker training in the hangar bay aboard Amphibious assault ship USS Bo.jpg 2,100 × 1,500; 497 KB
US Navy 070722-N-9421C-148 Hull Maintenance Technician Fireman Phillip Wright poses for a photo with a local Vietnamese child on a newly constructed playground set at Hoi Mai Orphanage during an engineering civic action program.jpg 1,800 × 1,200; 449 KB
US Navy 070730-N-8909B-043 Hull Maintenance Technician 3rd Class Patrick Whitmire uses a plasma cutter to cut a piece of heavy gauge aluminum while creating a work bench aboard amphibious assault ship USS Bonhomme Richard (LHD.jpg 2,100 × 1,500; 318 KB
US Navy 070820-N-8132M-018 Hull Technician Fireman Wesley Wilhelm, of Wilmington, Del., welds a stud inside the general workshop aboard guided-missile destroyer USS Arleigh Burke (DDG 51).jpg 1,500 × 2,250; 718 KB
US Navy 070822-N-8154G-039 Chief Hull Maintenance Technician Neil Pierce shows fire fighting equipment to Russian Fleet Adm. Vladimir Vasilyevich Masorin, Commander in Chief of the Russian Federation Navy.jpg 3,008 × 2,000; 832 KB
US Navy 070826-N-4124C-048 Hull Maintenance Technician 1st Class Jamey K. Parks, assigned to USS Juneau (LPD 10), plays catch with kids at the Tenshin-ryo Children's Home.jpg 3,008 × 2,000; 1.36 MB
US Navy 071019-N-0913B-030 Hull Maintenance Technician Fireman Thomas Ohara inspects a Halon system on a Landing Craft Air Cushion (LCAC) during a maintenance cycle.jpg 3,872 × 2,592; 987 KB
US Navy 080125-N-7955L-172 Hull Maintenance Technician 3rd Class Marc Kaski welds a piece of steel in the hull maintenance technician shop aboard the amphibious assault ship USS Kearsarge (LHD 3).jpg 3,008 × 2,000; 686 KB
US Navy 080129-N-6642L-023 Hull Maintenance Technician 2nd Class Raymond Viche modifies support mounts for electrical units aboard the aircraft carrier USS Nimitz (CVN 68).jpg 3,000 × 2,008; 1.92 MB
US Navy 080130-N-3218H-002 Hull Maintenance Technician Fireman Fabian Villota grinds a piece of pipe to use as a guide for mooring lines on the fo'c'sle of the Nimitz-class aircraft carrier USS Theodore Roosevelt (CVN 71).jpg 2,100 × 1,500; 1.06 MB
US Navy 080205-N-9760Z-002 Hull Maintenance Technician Fireman Brandon Oesch works on a toolbox holder in the repair shop aboard the nuclear-powered aircraft carrier USS Nimitz (CVN 68).jpg 3,000 × 2,008; 2.83 MB
US Navy 080205-N-9760Z-004 Hull Maintenance Technician 2nd Class Russell Roemer welds a machine part in the repair shop aboard the aircraft carrier USS Nimitz (CVN 68).jpg 3,000 × 2,008; 1.67 MB
US Navy 080207-N-9639L-077 Hull Maintenance Technician Fireman Jason Porter welds a spar in the machine shop aboard the aircraft carrier USS Harry S. Truman (CVN 75).jpg 2,520 × 1,800; 738 KB
US Navy 080214-N-2832L-011 Hull Maintenance Technician Fireman Jacob Dickens braze welds a drainage eductor aboard the amphibious assault ship USS Tarawa (LHA-1).jpg 1,993 × 3,000; 868 KB
US Navy 080214-N-2832L-054 Hull Maintenance Technician Fireman Nathan Avery braze welds a drainage eductor aboard amphibious assault ship USS Tarawa (LHA-1).jpg 1,993 × 3,000; 937 KB
US Navy 080225-N-5484G-002 Hull Maintenance Technician 2nd Class William Clark performs a braze qualification test in the machine shop of the aircraft carrier USS Nimitz (CVN 68).jpg 3,000 × 2,008; 1.38 MB
US Navy 080606-N-3548M-087 Aviation Boatswain's Mate (Handling) Airman Fredrick Stoneham, left, and Hull Maintenance Technician Fireman Gerard Wilson, assigned to the Pre-Commissioning Unit (PCU) George H. W. Bush (CVN 77), pic.jpg 2,243 × 1,602; 297 KB
US Navy 080608-N-9698C-055 Hull Maintenance Technician Fireman David O'Brian, a Sailor assigned to the Oliver Hazard Perry-class guided-missile frigate USS Crommelin (FFG 37), kisses his wife during the.jpg 1,593 × 2,100; 961 KB
US Navy 080614-N-3946H-012 Hull Maintenance Technician Fireman Andrew Brooks, of Montclair, Calif., cuts a pipe in the pipe fitter shop aboard the aircraft carrier USS Kitty Hawk (CV 63).jpg 3,872 × 2,592; 745 KB
US Navy 080626-N-3885H-008 Hull maintenance Technician 1st Class Nicholas Brunney, assigned to Pre-Commissioning Unit George H.W. Bush (CVN 77), checks in a motorcycle rider at the 2nd annual Motorcycle Rally at Naval Station N.jpg 2,100 × 1,500; 1.69 MB
US Navy 080809-N-1635S-002 Hull Maintenance Technician Fireman Tyler Peterson, from Oakland, Neb., cuts wood to build a table aboard the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76).jpg 3,872 × 2,592; 1.61 MB
US Navy 080809-N-7730P-060 Hull Maintenance Technician (HT) 3rd class Joe Vanhorn brazes a shelf to go in a supply storeroom aboard the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76).jpg 2,592 × 3,872; 1.01 MB
US Navy 080820-N-7280V-018 Hull Maintenance Technician 3rd Class Paris Luh enjoys an Asian-Pacific meal.jpg 1,500 × 2,100; 1,018 KB
US Navy 080828-N-4515N-181 Hull Maintenance Technician 1st Class Gregory Beene welds a fitting to an air-pipe.jpg 2,848 × 4,288; 3.4 MB
US Navy 080929-N-3610L-066 Hull Maintenance Technician Fireman Wayne Worley demonstrates to his junior firemen how to weld on a sheet of aluminum.jpg 3,872 × 2,592; 1.1 MB
US Navy 081005-N-2456S-025 Hull Maintenance Technician 3rd Class Craig Baker welds a brace for a handrail on the brow of the aircraft carrier USS Theodore Roosevelt (CVN 71).jpg 1,500 × 2,100; 558 KB
US Navy 081013-N-9900B-003 Hull Maintenance Technician Fireman Matt Brandsma assigned to the aircraft carrier USS Theodore Roosevelt's (CVN 71) repair division operates a router on a carrier plaque.jpg 2,100 × 1,500; 618 KB
US Navy 081023-N-9900B-005 Hull Maintenance Technician 3rd Class Jon Frydenlund welds together a tool cage.jpg 1,500 × 2,100; 283 KB
US Navy 081023-N-9900B-006 Hull Maintenance Technician 3rd Class Jon Frydenlund welds together a tool cage.jpg 1,500 × 2,100; 407 KB
US Navy 081106-N-9132C-112 Hull Maintenance Technician Fireman Laura Vasher stick welds metal aboard the Nimitz-class aircraft carrier USS Ronald Reagan (CVN 76).jpg 3,872 × 2,592; 1.74 MB
US Navy 081203-N-8822R-023 Hull Maintenance Technician Fireman Apprentice Josh Lonas uses a pipe cutter to cut a pipe.jpg 2,100 × 1,500; 166 KB
US Navy 090107-N-2562S-002 Hull Maintenance Technician 3rd Class Chris Baker supervises Hull Maintenance Technician Fireman Kyle Gregory.jpg 2,100 × 1,500; 1.46 MB
US Navy 090113-N-4774B-042 Hull Maintenance Technician Brian Winter welds cross braces to an aluminum chair.jpg 2,100 × 1,500; 375 KB
US Navy 090206-N-6597H-070 Hull Maintenance Technician 3rd Class James Engling, from Seattle, grinds burs from welded metal in the sheet metal shop aboard the aircraft carrier USS John C. Stennis (CVN 74).jpg 1,607 × 2,100; 1.03 MB
US Navy 090220-N-5251G-625 Major League Baseball Hall of Famer George Brett speaks with Hull Maintenance Technician 3rd Class Jess Thornsen and Hull Maintenance Technician 3rd Class Vladimir Manasweitsch.jpg 3,417 × 2,278; 1.07 MB
US Navy 090404-N-0901C-155 Hull Maintenance Technician 3rd Class Colin Powers and Store Keeper Seaman Daniel Daily sweep a room for suspects during Armed Sentry-Ships Reaction Force Basic (AS-SRFB).jpg 2,100 × 1,500; 1.84 MB
US Navy 090416-N-3666S-052 Hull Maintenance Technician 1st Class Bryan Silva refills a self-contained breathing apparatus.jpg 2,100 × 1,533; 784 KB
US Navy 090505-N-7280V-212 Hull Maintenance Technician 3rd Class Paris Luh reports to scene leader Damage Controlman 3rd Class Emmanuel Aguilar.jpg 2,100 × 1,500; 1.07 MB
US Navy 090508-N-5292M-161 Hull Maintenance Technician 3rd Class Rafael Serrano pulls the hood over the mask of Damage Controlman Fireman Leonard Richardson while racing to don chemical, biological and radiological defense gear.jpg 2,100 × 1,500; 288 KB
US Navy 090527-N-7478G-112 Lt. j.g. Jeffrey Hanson, assistant damage control officer aboard the amphibious command ship USS Blue Ridge (LCC 19), instructs scene leader Hull Maintenance Technician 3rd Class Christopher Leddy.jpg 1,800 × 1,200; 719 KB
US Navy 090629-N-9610C-106 Hull Maintenance Technician 3rd Class Joel Dennett, left, from Monroe, Wash., meets his four-month old son and wife after the Nimitz-class aircraft carrier USS John C. Stennis (CVN 74) pulls into Ever.jpg 1,959 × 1,487; 594 KB
US Navy 090721-N-9520G-068 Hull Maintenance Technician 3rd Class Aaron Thomasson, from Little Rock, Ark. assigned to the amphibious assault ship USS Essex (LHD 2), uses a grinder to smooth out a metal lettering project.jpg 2,520 × 1,800; 416 KB
US Navy 090801-N-2344B-119 Hull Maintenance Technician 3rd Class Carl Thompson modifies a shower mixer with an oxy-acetyl torch in the pipe shop aboard the aircraft carrier USS Ronald Reagan (CVN 76).jpg 3,000 × 1,993; 747 KB
US Navy 090801-N-2791J-201 Hull Maintenance Technician 3rd Class Miguel Thompson from Engineering Department, R-1 Division aboard the aircraft carrier USS Carl Vinson (CVN 70), cuts carbon steel with an oxyacetylene torch.jpg 2,848 × 4,288; 4.77 MB
US Navy 090812-N-7280V-062 Hull Maintenance Technician 3rd Class Thomas Gibson relays a message to Information Systems Technician 3rd Class Jonetta McCoy that a simulated class-alpha fire is out during an underway drill.jpg 2,205 × 1,500; 942 KB
US Navy 090825-N-7280V-084 Machinist's Mate Fireman Tara Steiner and Hull Maintenance Technician 2nd Class Christopher Leddy, flying squad rapid responders aboard the amphibious command ship USS Blue Ridge (LCC 19).jpg 2,113 × 1,500; 1,011 KB
US Navy 090909-N-7280V-250 Chief Hull Maintenance Technician Rodney Booker, a Damage Control Training Team (DCTT) member.jpg 2,079 × 1,500; 1.01 MB
US Navy 090910-N-7280V-186 Hull Maintenance Technician 2nd Class Christopher Leddy, the flying squad fire marshall aboard the amphibious command ship USS Blue Ridge (LCC 19).jpg 2,337 × 1,500; 891 KB
US Navy 090911-N-7280V-360 Hull Maintenance Technician 3rd Class Thomas Gibson brazes leaks on water heater coils aboard the amphibious command ship USS Blue Ridge (LCC 19).jpg 1,500 × 2,136; 805 KB
US Navy 090914-N-5345W-263 Chief Damage Controlman Donald Grothe supervises Hull Maintenance Technician 3rd Class John South and Damage Controlman Fireman David Pritchard during a hose-handling training exercise.jpg 2,100 × 1,522; 871 KB
US Navy 090914-N-7280V-303 Hull Maintenance Technician 2nd Class Paris Luh and Hull Maintenance Technician 2nd Class Adrian Garcia weld on a tubing for a collection, holding and transfer line.jpg 2,278 × 1,500; 772 KB
US Navy 090917-N-5345W-013 Chief Hull Maintenance Technician Jeffrey Middleton, right, trains fire team members on how to properly relieve the nozzleman during a general quarters drill.jpg 2,100 × 1,412; 1.07 MB
US Navy 090917-N-5345W-032 Hull Maintenance Technician 3rd Class John South secures emergency response equipment on the boat deck after a general quarters drill aboard the amphibious dock landing ship USS Fort McHenry (LSD 43).jpg 1,205 × 2,100; 759 KB
US Navy 090928-N-3830J-091 Hull Maintenance Technician 2nd Class Paris Luh welds a broken piece of the man overboard locker aboard the amphibious command ship USS Blue Ridge (LCC 19) while underway on a scheduled deployment.jpg 3,216 × 2,136; 839 KB
US Navy 091008-N-7280V-110 Chief Hull Maintenance Technician Rodney Booker, a damage control training team member, evacuates the fire room during a major fuel oil leak drill aboard the amphibious command ship USS Blue Ridge (LC.jpg 3,216 × 2,136; 561 KB
US Navy 091020-N-7498L-014 Hull Maintenance Technician 1st Class David Devoe, left, patches a pipe during damage control training at the Center of Naval Engineering Learning Site Pearl Harbor.jpg 3,008 × 2,000; 1.27 MB
US Navy 091020-N-7498L-053 Sailors secure the K-type shoring during damage control training at the Center of Naval Engineering Learning Site Pearl Harbor.jpg 3,008 × 2,000; 1.13 MB
US Navy 091105-N-7478G-054 Hull Maintenance Technician Fireman Cole French welds a T-shaped bracket for a bulkhead.jpg 2,144 × 1,424; 532 KB
US Navy 091106-N-0890S-316 Hull Maintenance Technician 3rd Class Johnathan Simmons Tig welds the spool of a fire pump aboard the multipurpose amphibious assault ship USS Wasp (LHD 1).jpg 2,848 × 4,288; 977 KB
US Navy 091109-N-3830J-225 Hull Maintenance Technician 1st Class Thomas Kiefer, assigned to the amphibious command ship USS Blue Ridge (LCC 19), demonstrates pipe patching to Vietnam navy officers assigned to Naval Zone 3 durin.jpg 2,100 × 1,500; 888 KB
US Navy 091109-N-3830J-228 Hull Maintenance Technician 1st Class Thomas Kiefer, assigned to the amphibious command ship USS Blue Ridge (LCC 19), demonstrates pipe patching to Vietnam navy officers assigned to Naval Zone 3 durin.jpg 2,100 × 1,500; 820 KB
US Navy 091109-N-3830J-229 Hull Maintenance Technician 1st Class Thomas Kiefer, assigned to the amphibious command ship USS Blue Ridge (LCC 19), demonstrates how to use a self-contained breathing apparatus to Vietnam navy offic.jpg 2,100 × 1,500; 976 KB
US Navy 091212-N-4959G-037 Hull Maintenance Technician 3rd Class Garret Thompson works on grinding and notching the legs of a table.jpg 3,027 × 2,366; 5.08 MB
US Navy 100106-6604E-N-054 Hull Maintenance Technician Fireman Devonish Murphy repairs a broken faucet.jpg 1,398 × 2,100; 815 KB
US Navy 100107-N-0307V-044 Sailors experience the undocking of the historic Battleship Missouri from the bridge of the ship.jpg 3,008 × 2,000; 1.52 MB
US Navy 100117-N-8878B-105 Journalist Geraldo Rivera interviews Hull Maintenance Technician 1st Class Harmon Hazelwood aboard USS Carl Vinson (CVN 70).jpg 2,100 × 1,500; 415 KB
US Navy 100122-N-8936G-014 Sailors participate in a damage control drill.jpg 4,288 × 2,848; 763 KB
US Navy 100128-N-5019M-002 Hull Maintenance Technician 3rd Class Colton Richart fixes a pipe aboard the Arleigh Burke-class guided-missile destroyer USS Curtis Wilbur (DDG 54).jpg 1,500 × 2,100; 1.38 MB
US Navy 100204-N-7478G-214 Hull Maintenance Technician 3rd Class Alex Bonner welds a bracket onto a deck in the engine room aboard the U.S. 7th Fleet Command ship USS Blue Ridge (LCC 19).jpg 1,958 × 1,382; 388 KB
US Navy 100222-N-7638K-012 Hull Maintenance Technician Chief Jeffery Middleton checks the bracing between trusses during a community service project.jpg 2,100 × 1,500; 438 KB
US Navy 100301-N-6692A-011 Damage Controlman Fireman Alicia Asbell leads hose team members in crash and smash fire training drills.jpg 2,100 × 1,500; 1.38 MB
US Navy 100303-N-7280V-509 Sailors use a Naval Firefighting Thermal Imager (NFTI) to asses a simulated casualty during a main space fire drill.jpg 1,107 × 1,500; 1.02 MB
US Navy 100311-N-7280V-203 Hull Maintenance Technician 2nd Class Paris Luh stands damage control central watch aboard USS Blue Ridge (LCC 19).jpg 2,331 × 1,500; 898 KB
US Navy 100311-N-7280V-204 Chief Electrician's Mate Mateo Canlas and Master Chief Electrician's Mate Ador Barcega direct Hull Maintenance Technician 3rd Class Alex Bonner and Electrician's Mate 3rd Class Gyanand Sookram during.jpg 2,048 × 1,500; 791 KB
US Navy 100324-N-7571G-084 Hull Maintenance Technician 3rd Class Matthew Tulley welds a television bracket aboard the amphibious assault ship USS Kearsarge (LHD 3).jpg 2,100 × 1,500; 1.75 MB
US Navy 100331-N-7280V-270 Sailors use a naval firefighting thermal imager (NFTI) to assess a simulated casualty during an engine room fire drill.jpg 2,179 × 1,500; 995 KB
US Navy 100413-N-7367K-004 Senior Chief Hull Maintenance Technician Don Mapes hugs his son during the battalion's homecoming at the training hall at Naval Construction Battalion Center, Gulfport.jpg 1,395 × 2,100; 983 KB
US Navy 100415-N-9753W-078 Electronics Technician 3rd Class Billy Dodson uses a needle gun during maintenance on the hull of the Ohio-class ballistic-missile submarine USS Alaska (SSBN 732).jpg 2,100 × 1,500; 1.7 MB
US Navy 100513-N-7280V-209 Sailors use a Naval Firefighting Thermal Imager (NFTI) to asses a simulated fire.jpg 1,500 × 2,132; 1.08 MB
US Navy 100525-N-7191M-011 Hull Maintenance Technician 3rd Class Christopher Gault, from Bellevue, Neb., uses an arc welder to install a doorframe aboard the aircraft carrier USS George Washington (CVN 73).jpg 1,500 × 2,100; 936 KB

(previous page) (next page)

Retrieved from "https://commons.wikimedia.org/w/index.php?title=Category:Hull_Maintenance_Technician_(United_States_Navy)&oldid=766955489"