Category:Washers (hardware)

washer

thin plate with a hole, normally used to distribute the load of a threaded fastener

Upload media

Subclass of

spacer

Part of

Has use

reduction (pressure)
prevention (galvanic corrosion)
spacer
spring (Belleville washer)
prevention (disassembly, lock washer)

Physically interacts with

Partially coincident with

flange nut

Authority file
Q637321 Library of Congress authority ID: sh85145331 National Library of Israel J9U ID: 987007551286805171
Reasonator Scholia Wikidocumentaries PetScan statistics WikiMap Locator tool KML file Search depicted

Subcategories

This category has the following 6 subcategories, out of 6 total.

B

Belleville washers‎ (12 F)

D

Drawings of washers‎ (10 F)

L

Lock washers‎ (6 C, 12 F)

P

Plain washers‎ (1 C, 24 F)

T

Tab washers‎ (5 F)

W

Washers with screws or other parts‎ (14 F)

Media in category "Washers (hardware)"

The following 82 files are in this category, out of 82 total.

De-Beilagscheibe.ogg 2.0 s; 20 KB
De-Unterlegscheibe.ogg 2.2 s; 22 KB
"sealing" washers (100757402).jpg 1,489 × 778; 824 KB
ARFISA 15.jpg 514 × 474; 107 KB
Belleville washer with rubber back.tif 1,527 × 1,026; 6.54 MB
Bolt with washer.jpg 900 × 769; 167 KB
Both spacers over head view.JPG 3,456 × 3,150; 1.99 MB
Burnt washer.JPG 5,184 × 3,456; 2.41 MB
Bügelflaschen swingtop mechanism closeup.jpg 565 × 448; 168 KB
Calibro di plastica con rondella 1.jpg 1,978 × 752; 125 KB
Clip washers.jpg 478 × 640; 89 KB
CLose up of washer vice system.JPG 5,184 × 3,456; 2.35 MB
Collar (machinery) (PSF).jpg 201 × 206; 4 KB
Completed board.JPG 2,448 × 3,264; 2.15 MB
Delta (Dacromet).jpg 2,048 × 1,536; 551 KB
Din 432.jpg 517 × 521; 118 KB
Din 434.jpg 527 × 454; 26 KB
Din 435.jpg 554 × 436; 26 KB
Din 436.jpg 631 × 449; 40 KB
Duplicate washer system without spacers.JPG 5,184 × 3,456; 3.2 MB
Elictrical tape left over.JPG 1,822 × 1,342; 941 KB
Femur, Fractura, Collum femoris, Screws, Washers, RTG.png 364 × 401; 116 KB
First 2 washers.jpg 3,264 × 1,836; 1.38 MB
First row of washers.JPG 2,448 × 3,264; 1.76 MB
Glued down washer with wires coiled.JPG 5,184 × 3,456; 3.17 MB
Gluing the holes.JPG 3,264 × 2,448; 1.92 MB
Hira.jpg 800 × 562; 45 KB
Insulating fiberglass washers for M3.jpg 3,400 × 2,267; 1.44 MB
Kikuza.jpg 800 × 562; 66 KB
M20 Direct Tension Indicators Washer.png 1,280 × 687; 1.08 MB
M30 Direct Tension Indicators Washer.png 771 × 687; 906 KB
Made vice for washer cutting.JPG 5,184 × 3,456; 2.18 MB
Me holding spacer in place.JPG 5,184 × 3,456; 2.87 MB
Mechanical Joint.jpg 866 × 422; 131 KB
Multimeter testing duplicate washer system.JPG 5,184 × 3,456; 2.34 MB
New Bonded Washer WIKIPEDIA DWG.png 2,234 × 1,454; 480 KB
Number6nut.JPG 640 × 480; 57 KB
Number6washers.JPG 640 × 480; 57 KB
Overhead of top spacer.JPG 5,184 × 3,456; 2.1 MB
Overhead view of duplicate washer system.JPG 5,184 × 3,456; 2.87 MB
Ringen.jpg 1,024 × 768; 200 KB
Sacer fitting into original working washer system model.JPG 5,184 × 3,456; 1.8 MB
Schrauben, Muttern und Unterlegscheiben -- 2020 -- 4150 (bw).jpg 6,720 × 4,480; 10.16 MB
Selbstdichtenden Unterlegscheibe Usit Ring Schnitt.svg 3,250 × 1,350; 3 KB
Side view of both spacers in duplicate washer system.JPG 5,184 × 3,456; 3.11 MB
Side view of both spacers in original washer system.JPG 5,184 × 3,456; 1.77 MB
Side view of spacer in bottom gap.JPG 4,180 × 3,017; 2.32 MB
Side view of top gap spacer.JPG 5,184 × 3,456; 1.67 MB
Siliconewasherglueddown.JPG 640 × 480; 58 KB
Single hole in plexiglass idea.JPG 5,184 × 3,456; 3.06 MB
Spint Montiert01.jpg 1,536 × 1,024; 325 KB
Spring (bolt).jpg 800 × 569; 52 KB
Testing original washer system with multimeter.JPG 5,184 × 3,456; 2.43 MB
The row of washers.JPG 2,448 × 3,264; 2.36 MB
The tape and washer.JPG 2,448 × 3,264; 1.72 MB
The washer being taped.JPG 2,448 × 3,264; 2.22 MB
The washer.JPG 320 × 240; 29 KB
The white marks from the glue.JPG 2,448 × 3,264; 1.84 MB
The wire is now longer.jpeg 2,448 × 3,264; 1.87 MB
The wire is too short.jpeg 2,448 × 3,264; 1.79 MB
Thrust Washer Kits 01.jpg 4,160 × 2,340; 1.99 MB
Thrust Washer Kits 02.jpg 4,160 × 2,340; 1.29 MB
Thrust Washer Kits.jpg 4,160 × 2,340; 1.4 MB
Tornillo.JPG 3,072 × 2,304; 1.27 MB
Underneath view of working design.JPG 5,184 × 3,456; 3.1 MB
Unterlegscheiben, Mini-Skyline -- 2020 -- 3875.jpg 6,667 × 4,445; 13 MB
Up close view of solder.JPG 360 × 480; 34 KB
Vice holding washer.JPG 5,184 × 3,456; 2.54 MB
Vicewasher.JPG 640 × 480; 55 KB
Washer soldered onto the board.JPG 360 × 480; 37 KB
Washer template.JPG 360 × 480; 38 KB
Washerandscrew.JPG 640 × 480; 137 KB
Washeratopboard.JPG 640 × 480; 55 KB
Washers in a transparent zipper storage bag - A.jpg 2,312 × 3,083; 1.63 MB
Washers in a transparent zipper storage bag - B.jpg 3,456 × 4,608; 1.98 MB
Washers.agr.jpg 692 × 599; 65 KB
Washerwiringcrimps.JPG 640 × 480; 140 KB
Wiring the washers.JPG 3,264 × 2,448; 1.98 MB
WoodDeck-2797.jpg 2,816 × 2,112; 2.71 MB
Zoomed out view hole in center of washer.JPG 5,184 × 3,456; 3.07 MB
ノルトロックワッシャー.png 400 × 399; 102 KB
ノルトロックワッシャーのバリエーション.png 1,168 × 364; 309 KB

Retrieved from "https://commons.wikimedia.org/w/index.php?title=Category:Washers_(hardware)&oldid=337522315"