File:Homemade German equatorial mount.jpg

Original file(3,008 × 2,000 pixels, file size: 2.26 MB, MIME type: image/jpeg)

Captions

Captions

Add a one-line explanation of what this file represents

Summary edit

Description

home made "german" astro-mount. all plywood, a bit of Teflon and PVC tubes. two steppers salvaged from old scsi scanner. an arduino board. an old Philips CCD webcam, some home made linux software for guiding. used for this pic

It has some first-cast defects to be corrected : - the declination axis needs a better balancing, it crosses with the other axis too far from where the optics stands, putting too much stress unbalanced default-weigt. - some dovetail joint fixations are to be added in order to swap optics and balance them easily, it will also add weight ...

- and finally, the periodic errors from the the threaded-rods ends are rather strong, I need to find a better mechanical joint rather than a pair of bolts (on the stepper side).
Date
Source home made
Author myyorgda

Licensing edit

w:en:Creative Commons
attribution
This file is licensed under the Creative Commons Attribution 2.0 Generic license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
This image, originally posted to Flickr, was reviewed on 11 July 2013 by the administrator or reviewer Hahc21, who confirmed that it was available on Flickr under the stated license on that date.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:24, 10 July 2013Thumbnail for version as of 13:24, 10 July 20133,008 × 2,000 (2.26 MB)Jacopo Werther (talk | contribs){{Information |Description=home made "german" astro-mount. all plywood, a bit of Teflon and PVC tubes. two steppers salvaged from old scsi scanner. an arduino board. an old Philips CCD webcam, some home made linux software for guiding. used for [http:/...

There are no pages that use this file.

Metadata