Wikimedia Commons

File:OhmEye's Introduction and Orientation for 3D Printing with the Reprap Prusa Mendel.ogv

OhmEye's_Introduction_and_Orientation_for_3D_Printing_with_the_Reprap_Prusa_Mendel.ogv ‎(Ogg multiplexed audio/video file, Theora/Vorbis, length 14 min 49 s, 640 × 360 pixels, 876 kbps overall, file size: 92.92 MB)

Captions

Captions

Add a one-line explanation of what this file represents

Summary edit

Description
English: OhmEye's Introduction and Orientation for 3D Printing with the Reprap Prusa Mendel
Date 23 April 2011 (original upload date)
Source https://www.youtube.com/watch?v=B3D56IpACME
Author OhmEye

Licensing edit

w:en:Creative Commons
attribution
This file is licensed under the Creative Commons Attribution 3.0 Unported license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
This file, which was originally posted to https://www.youtube.com/watch?v=B3D56IpACME, was reviewed on 11 September 2011 by reviewer Saibo, who confirmed that it was available there under the stated license on that date.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:38, 8 September 201114 min 49 s, 640 × 360 (92.92 MB)Mattwj2002 (talk | contribs)

You cannot overwrite this file.

The following page uses this file:

Transcode status

Update transcode status
Format Bitrate Download Status Encode time
VP9 360P 585 kbps Completed 17:51, 5 September 2018 14 min 59 s
Streaming 360p (VP9) Not ready Unknown status
VP9 240P 341 kbps Completed 17:49, 5 September 2018 12 min 40 s
Streaming 240p (VP9) 265 kbps Completed 12:03, 6 February 2024 3.0 s
WebM 360P 569 kbps Completed 02:52, 14 November 2012 21 min 46 s
Streaming 144p (MJPEG) 802 kbps Completed 01:56, 17 November 2023 17 s
Stereo (Opus) 75 kbps Completed 01:57, 17 November 2023 13 s
Stereo (MP3) 128 kbps Completed 01:57, 17 November 2023 22 s

Metadata

This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.

Retrieved from "https://commons.wikimedia.org/w/index.php?title=File:OhmEye%27s_Introduction_and_Orientation_for_3D_Printing_with_the_Reprap_Prusa_Mendel.ogv&oldid=727415275"