File:PATA hard disk with SATA converter.png

Original file(1,600 × 635 pixels, file size: 1.32 MB, MIME type: image/png)

Captions

Captions

Add a one-line explanation of what this file represents
Description
English: Seagate Barracuda 7200.7 series hard disk drive with SATA-to-PATA converter attached. It is based on the Silicon Image SiI3811A bridge chip and, being an active device, requires a separate power connection. A layer of foam has been added to the back of the board for insulation (untrimmed leads) and stability.
Date
Source Own work
Author Trio3D
w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:08, 13 March 2017Thumbnail for version as of 21:08, 13 March 20171,600 × 635 (1.32 MB)Trio3D (talk | contribs)Brightness adjustment.
20:47, 13 March 2017Thumbnail for version as of 20:47, 13 March 20171,600 × 635 (1.34 MB)Trio3D (talk | contribs){{Information |Description ={{en|1=Seagate Barracuda 7200.7 series hard disk drive with SATA-to-PATA converter attached. It is based on the Silicon Image SiI3811A bridge chip and, being an active device, requires a separate power connection. A layer...

The following page uses this file:

File usage on other wikis

The following other wikis use this file:

Metadata