Category:3D printing
English: 3D-printing
Nederlands: 3D-printen
中文(臺灣):3D列印。
layer-by-layer additive process used to make a three-dimensional object | |||||
Upload media | |||||
Instance of |
| ||||
---|---|---|---|---|---|
Subclass of | |||||
Different from | |||||
| |||||
![]() |
Subcategories
This category has the following 25 subcategories, out of 25 total.
3
- 3D food printers (12 F)
- 3D printing adhesion (5 F)
- 3D printing area comarison (21 F)
- 3D printing filament (4 F)
- 3D Printshow 2014 (159 F)
- 3D selfie (14 F)
- 3D-printed stethoscopes (3 F)
C
F
I
- Infill (3D printing) (9 F)
P
S
- Stereolithography (9 F)
- Becky Stern (1 P, 2 F)
- STL file format (5 F)
- 3D printed surfaces (6 F)
V
- Varinex (7 F)
Media in category "3D printing"
The following 200 files are in this category, out of 350 total.
(previous page) (next page)-
0055s.png 5,461 × 8,192; 29.59 MB
-
10 cubic centimetres volume calibration part (20x50 mm).stl 5,120 × 2,880; 684 bytes
-
1002141103a.jpg 3,120 × 4,160; 4.04 MB
-
2011-11-05 wcn 14.JPG 3,648 × 2,736; 1.81 MB
-
3-D Printing at FDA (8205) (9561244733).jpg 2,654 × 3,989; 4.92 MB
-
3-D Printing at FDA (8215) (9561244291).jpg 2,611 × 1,733; 2.18 MB
-
3-D Printing at FDA (8231) (9564033498).jpg 3,723 × 2,477; 4.03 MB
-
3-D Printing at FDA (8242) (9561244299).jpg 2,784 × 1,848; 2.94 MB
-
3-D Printing at FDA (8266) (9561243809).jpg 1,848 × 2,784; 3.03 MB
-
3-D Printing at FDA (8267) (9561243773).jpg 1,764 × 2,657; 782 KB
-
3D Concrete Printer.jpg 7,728 × 4,354; 13.25 MB
-
3D print robot.jpg 720 × 1,280; 108 KB
-
3D print steps.svg 707 × 182; 19 KB
-
3D Printed Mecha Chibis.jpg 3,840 × 2,160; 631 KB
-
3D printed parts for face shields.jpg 3,024 × 4,032; 552 KB
-
3D Printed Villa Master Plan Scale Model.jpg 600 × 400; 236 KB
-
3D printer at 35c3 02.jpg 5,184 × 3,888; 8.54 MB
-
3D printer big.jpg 827 × 1,085; 646 KB
-
3D printer EAC (close-up).jpg 6,016 × 4,000; 7.71 MB
-
3D printer EAC.jpg 6,016 × 4,000; 8.1 MB
-
3D printer.png 1,314 × 1,254; 2.32 MB
-
3D Printing at NASA.jpg 3,791 × 3,000; 3.17 MB
-
3d printing cookies winners.jpg 6,000 × 4,000; 6 MB
-
3D printing experiential booth, Taipei IT Month 20161210.jpg 3,200 × 2,400; 871 KB
-
3D Printing-skylt.jpg 1,184 × 1,184; 330 KB
-
3D Ring 01.png 1,274 × 538; 578 KB
-
3D Ring 02.png 1,002 × 588; 621 KB
-
3D Ring 03.png 998 × 588; 628 KB
-
3D Ring 04.png 1,004 × 590; 529 KB
-
3D Ring 05.png 1,280 × 642; 682 KB
-
3D Ring 06.png 1,280 × 640; 586 KB
-
3D Ring 07.png 1,000 × 594; 522 KB
-
3D Ring 08.png 1,276 × 644; 355 KB
-
3D ring with diamond.stl 5,120 × 2,880; 30 KB
-
3D ring with heart.stl 5,120 × 2,880; 34 KB
-
3D-Druck Lithophanie.jpg 4,032 × 1,960; 2.91 MB
-
3D-gedrucktes Wikpedia-Logo als Lithophanie.jpg 4,032 × 1,960; 1.64 MB
-
3D-printed Microstructure.jpg 1,852 × 3,293; 2.63 MB
-
3D-printed rocket fin can.jpg 3,589 × 3,024; 2.96 MB
-
3D-Printsupport Suzanne Wireframe.png 960 × 540; 320 KB
-
3D-Printsupport Suzanne Wireframe.stl 5,120 × 2,880; 4.08 MB
-
3D-принтер в работе.jpg 5,184 × 3,456; 4.78 MB
-
3DCARBIDE PROJECT.png 533 × 600; 492 KB
-
3dp-humanbone.png 702 × 395; 252 KB
-
3dpclip.png 692 × 747; 122 KB
-
3dphoto1.jpg 640 × 480; 75 KB
-
3dphoto2.jpg 640 × 480; 74 KB
-
3dphoto3.jpg 2,592 × 1,456; 1.2 MB
-
3dvstrad.jpg 268 × 203; 15 KB
-
3DWOX 2X 2.jpg 2,133 × 1,347; 796 KB
-
3DWOX 2X 정사각형 프레임.jpg 1,367 × 1,367; 1.07 MB
-
3DWOX 7X 2.jpg 2,133 × 1,347; 883 KB
-
3DWOX 7X 정사각형 프레임.jpg 1,367 × 1,367; 981 KB
-
3DWOX DP200 정사각형 프레임.jpg 1,367 × 1,367; 1.09 MB
-
3DWOX DP200.jpg 2,133 × 1,347; 827 KB
-
4D printed soy resin compatibility.jpg 256 × 256; 12 KB
-
4D printed soy resin material change.jpg 926 × 1,965; 263 KB
-
AA autoAbode Logo.svg 512 × 512; 8 KB
-
Accoustic fabrication.png 2,384 × 774; 654 KB
-
AddPowder project.png 533 × 600; 413 KB
-
Addup-logotype.png 480 × 381; 47 KB
-
Advs2797-fig-0001-m.jpg 1,000 × 873; 210 KB
-
AIO CES 2016.jpg 5,312 × 2,320; 4.15 MB
-
Albedoga.png 3,232 × 2,584; 3.32 MB
-
Aldalox.jpg 1,346 × 1,045; 298 KB
-
AMIE 3D printing process (21461983518).png 7,689 × 5,126; 35.56 MB
-
Amy Karle with her artwork The Heart of Evolution?, 2019.jpg 720 × 720; 406 KB
-
Animation-GIF.gif 1,200 × 675; 186 KB
-
Architecture Site Masterplan Miniature Scale Model.jpg 2,285 × 1,714; 1.23 MB
-
Arduino Tech.jpg 960 × 720; 74 KB
-
Artwork by Amy Karle in bio atelier at Mori Art Museum.jpg 576 × 346; 79 KB
-
Artwork in bio atelier at Mori Art Museum 2019-2020.jpg 849 × 432; 166 KB
-
AstroPrint Cloud Interface.jpg 3,024 × 1,562; 2.03 MB
-
ATE Conference and 3-D printing.jpg 599 × 447; 48 KB
-
AutoAbode Logo.png 180 × 180; 6 KB
-
Autosyringe.png 1,023 × 825; 1,000 KB
-
AX Customs - Banner.jpg 1,298 × 590; 43 KB
-
B2X300 DIY KIT.png 300 × 300; 87 KB
-
BARAKZAI 3D.png 2.png 500 × 500; 51 KB
-
Base di sostegno per l'anello + prolungamento.png 696 × 415; 394 KB
-
Base di sostegno per l'anello.png 634 × 421; 357 KB
-
Beams.JPG 3,264 × 2,448; 1.67 MB
-
BEE2B project.png 973 × 700; 425 KB
-
BEEINSCHOLL.png 300 × 300; 75 KB
-
BEETHEFIRST+.png 300 × 300; 51 KB
-
BelleimpressiobBlolab.jpg 2,976 × 3,116; 1.45 MB
-
Binder jetting.png 1,985 × 1,067; 99 KB
-
BinderJetting.svg 1,985 × 1,067; 59 KB
-
Bioart in bio atelier at Mori Art Museum (artwork by Amy Karle).jpg 960 × 644; 177 KB
-
Bioprinter project.png 973 × 800; 619 KB
-
BISC Lincoln Park 3D Printer.jpg 7,360 × 4,912; 20.29 MB
-
Black 3D printer.jpg 826 × 809; 422 KB
-
BlueberryKits-YEE-BleSpeaker.jpg 1,080 × 1,440; 123 KB
-
Boson Graviton B300 Front Blue.png 547 × 706; 203 KB
-
Boson Machines Graviton Evolution Automation Expo.jpg 1,220 × 915; 191 KB
-
Botobjects.png 224 × 224; 15 KB
-
Bottlerolling.gif 218 × 134; 269 KB
-
Bre and Me, at the Botcave! (5811824800).jpg 4,320 × 3,240; 2.65 MB
-
Bre Pettis at Maker Faire Detroit 2010.jpg 2,448 × 3,264; 1.42 MB
-
Bud scars on model yeast cell. 3D printed.jpg 3,812 × 2,412; 1.09 MB
-
Budding yeast cell walls model. 3D printed.jpg 4,312 × 2,385; 1.3 MB
-
Calibrationcube-OS3DPmaterials.jpg 893 × 576; 215 KB
-
Cazza Logo.png 1,458 × 324; 1.81 MB
-
Checking out amazing output of 3D printing (5609678602).jpg 3,324 × 1,871; 744 KB
-
Checking out the American made technology for 3D printing (5609098817).jpg 1,871 × 3,324; 883 KB
-
Chipconverter.png 500 × 481; 45 KB
-
CJP 3DSystems ProJet-4500.jpg 4,626 × 2,346; 3.35 MB
-
Classwork for free or busy parking lot.stl 5,120 × 2,880; 443 KB
-
Collimator Tungsten 2-5d5c0808c904af3d327fe563-0.jpg 1,805 × 1,677; 690 KB
-
Combat Center Marines get schooled on 3D printing 161116-M-RO214-495.jpg 5,760 × 3,840; 17.71 MB
-
Compression of FFF-based 3D printed PLA.jpg 845 × 550; 62 KB
-
Cookie cutter made with a 3D printer.jpg 1,291 × 750; 143 KB
-
Correa David biomimetic 4D printing.jpg 1,275 × 675; 464 KB
-
Craft Fence.jpg 1,800 × 1,350; 2.35 MB
-
Creator 3.png 500 × 500; 246 KB
-
Creazione portachiavi 3D 01.png 399 × 344; 195 KB
-
Creazione portachiavi 3D 02.png 682 × 490; 407 KB
-
Creazione portachiavi 3D 03.png 806 × 514; 492 KB
-
Creazione portachiavi 3D 04.png 764 × 529; 481 KB
-
Creazione portachiavi 3D 05.png 707 × 534; 526 KB
-
Creazione portachiavi 3D 06.png 1,065 × 826; 1.19 MB
-
Creazione portachiavi 3D 07.png 625 × 616; 483 KB
-
Creazione portachiavi 3D 08.png 226 × 179; 64 KB
-
Creazione portachiavi 3D 09.png 188 × 110; 33 KB
-
Creazione portachiavi 3D 10.png 472 × 336; 242 KB
-
Creazione portagioie stampa 3D 01.png 758 × 513; 118 KB
-
Creazione portagioie stampa 3D 02.png 653 × 657; 156 KB
-
Creazione portagioie stampa 3D 03.png 702 × 516; 142 KB
-
Creazione portagioie stampa 3D 04.png 901 × 740; 235 KB
-
Creazione portagioie stampa 3D 05.png 700 × 477; 114 KB
-
Creazione portagioie stampa 3D 06.png 905 × 652; 188 KB
-
Creazione portagioie stampa 3D 07.png 620 × 493; 127 KB
-
Creazione portagioie stampa 3D 08.png 695 × 537; 126 KB
-
Creazione portagioie stampa 3D 09.png 321 × 357; 17 KB
-
Creazione portagioie stampa 3D 10.png 1,027 × 730; 124 KB
-
Dan Moi, a Printable Musical Instrument! (5849570230).jpg 4,320 × 3,240; 2.38 MB
-
Datagnome "Kinky".jpg 3,472 × 4,624; 5.66 MB
-
Digital Art Scultpure Ivo Meier Web.jpg 1,280 × 1,280; 281 KB
-
Digital Eagle Articles - 3D Printing Issue 1.pdf 1,239 × 1,752; 148 KB
-
DotGo 2019 - Ellen Körbes - Go For Phallic Object Generation.webm 16 min 44 s, 1,920 × 1,080; 111.26 MB
-
Drop stock airsoft weapon.jpg 2,048 × 1,149; 228 KB
-
Earsm.jpg 7,360 × 4,912; 434 KB
-
Engineer working on a 3d-model.jpg 3,090 × 2,048; 3.65 MB
-
Entry attempt -1.jpg 960 × 720; 59 KB
-
Etapas impresion 3d.jpg 310 × 331; 19 KB
-
EWMA 2023 Italy Interior Today.jpg 2,000 × 1,500; 402 KB
-
Example of 3D printer support material.jpg 501 × 498; 151 KB
-
FabWeaver logo.png 1,957 × 280; 14 KB
-
FalkGyorgy-by-gordoneszter-4607r.jpg 5,845 × 3,897; 2.8 MB
-
FDM.png 771 × 519; 41 KB
-
Filamento ABS.png 800 × 387; 318 KB
-
Fractured surface of titanium alloy.tif 1,536 × 1,025; 4.53 MB
-
Fullydenseceramic.jpg 1,037 × 680; 132 KB
-
FZU 3Dprinting 3.jpg 3,000 × 2,000; 953 KB
-
FZU 3Dprinting 4.jpg 3,000 × 2,000; 930 KB
-
Ga walker2.png 1,100 × 671; 169 KB
-
Ga-bottleroller.jpg 1,553 × 886; 248 KB
-
Ga-chip.png 1,200 × 1,100; 415 KB
-
Generar arquivo stl.jpg 960 × 463; 131 KB
-
Gentvent.jpg 765 × 574; 109 KB
-
Getting close! (5815111190).jpg 4,320 × 3,240; 2.31 MB
-
GLASS II - Mediated Matter.webm 5 min 27 s, 1,920 × 1,080; 95.07 MB
-
Graphical abstract-synth2real.jpg 1,125 × 345; 55 KB
-
Hangprinter-direct.png 576 × 488; 120 KB
-
Heat Test @ 220C (5829006574).jpg 846 × 492; 54 KB
-
Heat Test @ 50C (5829006534).jpg 853 × 494; 54 KB
-
Heatsealing.png 396 × 349; 171 KB
-
How to attribute authorship in printed 3D objects?.png 500 × 354; 159 KB
-
Hubs Logo.jpg 1,000 × 340; 30 KB
-
ILA 2024, Schoenefeld (ILA44487).jpg 6,720 × 4,480; 10.17 MB
-
Image etape SLS.png 618 × 375; 23 KB
-
Impresion 3d en cali colombia ip.jpg 1,440 × 1,440; 95 KB
-
Impresora 3D (0.25 mm).JPG 3,264 × 2,448; 1.64 MB
-
InexpensiveMarmoreal3DPrintedNaomiWuBust.jpg 3,120 × 4,160; 2.94 MB
-
Inkjet 3D Printing.svg 431 × 172; 7 KB
-
Insects au gratin by Susana Soares.JPG 3,008 × 1,688; 1.88 MB
-
It's Alive! (5822471974).jpg 754 × 769; 75 KB
-
K TABLETTE 1.2b631 instant.jpg 2,221 × 2,242; 561 KB
-
K TABLETTE 1.2s652 instant.jpg 1,977 × 2,010; 688 KB
-
Klipper-logo png.png 400 × 330; 20 KB
-
Klipper-logo svg.svg 512 × 416; 8 KB
-
Laternsertal aus Schokolade.jpg 4,000 × 3,000; 4.47 MB
-
LOGO - 4D PIONEERS.png 1,943 × 311; 24 KB
-
Logo da Wikipédia em impressão 3D.webm 1 min 41 s, 1,920 × 1,080; 33.81 MB
-
Logo Prodways Group.png 463 × 136; 10 KB
-
Logo q3d.png 474 × 361; 22 KB
-
Logo Volumic fond blanc.jpg 2,480 × 2,710; 464 KB
-
Logo Volumic fond noir.jpg 2,480 × 2,710; 603 KB
-
Logo World Advanced Saving Project.jpg 500 × 340; 26 KB
-
Logo-2016-180-180.png 180 × 180; 8 KB
-
Logo-2016-300-50.png 300 × 50; 5 KB
-
Logo-Xtreee.png 435 × 171; 21 KB
-
Lowlab.png 696 × 408; 218 KB
-
Lyman-filament-extruder.jpg 690 × 518; 259 KB
-
M4 3D printer.png 926 × 851; 872 KB
-
Makerbot printing problems.jpg 3,264 × 1,836; 1.16 MB
-
Makers Empire 3D Modeling Software.jpg 2,732 × 2,048; 658 KB
-
Making 3-D Bioprinted Tissue.jpg 4,864 × 3,648; 3.16 MB