Category:Warwood Tool Company - HAER

Subcategories

This category has only the following subcategory.

D

Warwood Tool Company - HAER drawings‎ (4 F)

Media in category "Warwood Tool Company - HAER"

The following 37 files are in this category, out of 37 total.

GENERAL INTERIOR VIEW FROM CENTER OF SHOP LOOKING NORTH - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-7.tif 5,000 × 3,597; 17.15 MB
GENERAL VIEW OF EAST (FRONT) FROM NORTHEAST - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-1.tif 5,000 × 3,599; 17.16 MB
GENERAL VIEW OF MATERIAL UNLOADING AND STORAGE SECTION FROM SOUTHWEST - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-6.tif 5,000 × 3,588; 17.11 MB
INTERIOR VIEW OF BLISS -74 1-2 PRESS OPERATED BY JEFF HOHMAN; USED TO TRIM THE EXCESS METAL OR FLASH FROM BLADE END OF POST HOLE DIGGER - Warwood Tool Company, Foot of HAER WVA,35-WHEEL,39-13.tif 3,596 × 5,000; 17.15 MB
INTERIOR VIEW OF BRADLEY HAMMER (BEHIND JAMES GLASPELL, OPERATOR; BLURRED BY MOTION) IN OPERATION - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-19.tif 5,000 × 3,564; 17 MB
INTERIOR VIEW OF EYE PRESS AREA, DETAIL OF SLOTTED TYPE FURNACE - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-11.tif 5,000 × 3,581; 17.08 MB
INTERIOR VIEW OF EYE PRESS AREA, SAME AS ABOVE WITH MEN AT WORK- CRAIG TSCHAPPAT, HEATER; JEFF MILLER, OPERATOR; JOHN TOTH, SAWMAN - Warwood Tool Company, Foot of Nineteenth HAER WVA,35-WHEEL,39-10.tif 5,000 × 3,557; 16.96 MB
INTERIOR VIEW OF EYE PRESS AREA; TO LEFT IS A TWO-BAY SLOTTED TYPE FURNACE, TO CENTER IS EYE PRESS, TO RIGHT IS CURCULAR SAW - Warwood Tool Company, Foot of Nineteenth Street, HAER WVA,35-WHEEL,39-9.tif 5,000 × 3,565; 17 MB
INTERIOR VIEW OF PRE-HEATED BAR FROM FURNACE (RIGHT) BEING OFFERED INTO THE UPSETTER; CRAIG TSCHAPPAT OPERATOR - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio HAER WVA,35-WHEEL,39-16.tif 5,000 × 3,591; 17.13 MB
INTERIOR VIEW OF TWO-INCH ACME UPSETTER (LEFT) AND SINGLE BAY SLOTTED TYPE FURNACE (RIGHT); CRAIG TSCHAPPAT, OPERATOR THE UPSETTER FORGES THE TAMPING BARON THE POST HOLE DIGGER HAER WVA,35-WHEEL,39-15.tif 5,000 × 3,597; 17.15 MB
INTERIOR VIEW, BAR ROLL FORGE - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-30.tif 5,000 × 3,533; 16.85 MB
INTERIOR VIEW, BAR ROLL FORGE - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-31.tif 5,000 × 3,570; 17.03 MB
INTERIOR VIEW, BLISS PRESS - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-32.tif 3,563 × 5,000; 16.99 MB
INTERIOR VIEW, BRAD CURRY AND JAMIE GLASPELL REBUILDING A SLOTTED TYPE FURNACE - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-20.tif 5,000 × 3,534; 16.85 MB
INTERIOR VIEW, CHAMBERSBURG DROP HAMMER (LEFT) AND NIAGARA PRESS (RIGHT); NOTE WOOD SHAFT USED TO RAISE DROP HAMMER - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, HAER WVA,35-WHEEL,39-26.tif 3,577 × 5,000; 17.06 MB
INTERIOR VIEW, DENISON MULTI-PRESS FOR INSERTION OF WEDGES ONTO HANDLES AND CUTTING OFF SCRAP END OF HANDLE FOLLOWING WEDGE INSERTION, BRIAN KIMBLE, OPERATOR - Warwood Tool HAER WVA,35-WHEEL,39-38.tif 5,000 × 3,565; 17 MB
INTERIOR VIEW, DETAIL OF NIAGARA PRESS - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-28.tif 3,572 × 5,000; 17.04 MB
INTERIOR VIEW, DETAIL OF SIZING GUAGE ADJACENT TO BRADLEY HAMMER - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-25.tif 5,000 × 3,574; 17.04 MB
INTERIOR VIEW, DETAIL OF TRIMMED FLASH; FLASH IS EXCESS METAL EXTRUDED BETWEEN THE DIES USED TO FORGE THE BLADE END OF THE POST HOLE DIGGER - Warwood Tool Company, Foot of HAER WVA,35-WHEEL,39-14.tif 3,614 × 5,000; 17.24 MB
INTERIOR VIEW, ERIE DROP HAMMER; NOTE HAMMER IS IDLE, NO WOOD SHAFT TO RAISE HAMMER - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-27.tif 3,547 × 5,000; 16.92 MB
INTERIOR VIEW, EYE PRESS - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-29.tif 3,589 × 5,000; 17.12 MB
INTERIOR VIEW, HABS-HAER TEAM MEMBER, MARK RADVEN DRAWING THE BRADLEY HAMMER - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-34.tif 5,000 × 3,576; 17.05 MB
INTERIOR VIEW, NORTON GRINDER, TYPE-S USED TO GRIND ROUGH EDGES OFF THE FORGED TOOLS; NOTE OPERATOR IS FINISH GRINDING BLADE END OF A POST HOLE DIGGER AND TAMPING BAR - Warwood HAER WVA,35-WHEEL,39-36.tif 5,000 × 3,579; 17.07 MB
INTERIOR VIEW, PAINTING AREA SHOWING PAINT VAT AND CONVEYOR LINE WITH THE TOOLS HANGING FROM HOOKS TO DRY; NOTE PINCH POINT CROW BARS (CENTER) - Warwood Tool Company, Foot of HAER WVA,35-WHEEL,39-37.tif 3,550 × 5,000; 16.93 MB
INTERIOR VIEW, PRESS - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-33.tif 3,553 × 5,000; 16.94 MB
INTERIOR VIEW, SHEARING OF RAW STOCK USING CLEVELAND SHEAR; JOHN TOTH, OPERATOR - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-8.tif 5,000 × 3,551; 16.93 MB
INTERIOR VIEW, WHEELBRATOR-FRYE SHOT PEENER FOR REMOVAL OF RUST AND SCALE; NOTE TOOLS ARE TUMBLED WITH BLASTED WITH LEAD SHOT TO CLEAN SURFACES - Warwood Tool Company, Foot of HAER WVA,35-WHEEL,39-35.tif 3,561 × 5,000; 16.98 MB
INTERIOR VIEW, WILLIAM GRAY AT SIZING GUAGE ADJACENT TO BRADLEY HAMMER; NOTE THIS IS THE SAME TOOL AS BEING FORGED ABOVE - Warwood Tool Company, Foot of Nineteenth Street, HAER WVA,35-WHEEL,39-24.tif 3,588 × 5,000; 17.11 MB
INTERIOR VIEW, WILLIAM GRAY AT SLOTTED TYPE FURNACE WITH A BRADLEY HAMMER IN THE FOREGROUND - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-21.tif 5,000 × 3,564; 17 MB
INTERIOR VIEW, WILLIAM GRAY OPERATING THE BRADLEY HAMMER, WITH UPPER AND LOWER IMPRESSION DIES CLOSED - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, HAER WVA,35-WHEEL,39-23.tif 5,000 × 3,563; 16.99 MB
INTERIOR VIEW, WILLIAM GRAY OPERATING THE BRADLEY HAMMER, WITH UPPER IMPRESSION DIE RAISED READY TO FORGE TOOL - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio HAER WVA,35-WHEEL,39-22.tif 5,000 × 3,544; 16.9 MB
PERSPECTIVE VIEW OF SOUTH (FRONT) STORAGE-MACHINE SHOP SECTION - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-3.tif 5,000 × 3,585; 17.1 MB
SOUTH (FRONT) AND WEST SIDE OF HOME OF JOHN A. MOORE, SECRETARY AND LATER PRESIDENT OF WARWOOD TOOL CO. (NOTE WARWOOD TOOL IN THE BACKGROUND, BETWEEN THE HOUSES) - Warwood HAER WVA,35-WHEEL,39-A-1.tif 5,000 × 3,544; 16.9 MB
SOUTH (FRONT) AND WEST SIDE OF PARTS STORAGE (FOREGROUND) AND MACHINE SHOP (BACKGROUND), LOOKING NORTHEAST - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio HAER WVA,35-WHEEL,39-2.tif 5,000 × 3,551; 16.93 MB
SOUTH (FRONT) ELEVATION OF STORAGE-MACHINE SHOP SECTION - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-4.tif 5,000 × 3,565; 17 MB
SOUTH (FRONT) ELEVATION OF STORAGE-MACHINE SHOP SECTION, WITH SCALE - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-5.tif 5,000 × 3,550; 16.93 MB
VIEW OF PRE-HEATED BAR FROM FURNACE (RIGHT) BEING SHAPED BY THE UPSETTER; CRAIG TSCHAPPAT OPERATOR - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV HAER WVA,35-WHEEL,39-17.tif 5,000 × 3,546; 16.91 MB

Retrieved from "https://commons.wikimedia.org/w/index.php?title=Category:Warwood_Tool_Company_-_HAER&oldid=337983135"