File:Livid DIY Controller - Livid Button baseplates (2010-03-29 13.20.54 by c-g.).jpg

Original file(3,072 × 2,304 pixels, file size: 3.13 MB, MIME type: image/jpeg)

Captions

Captions

Add a one-line explanation of what this file represents

Summary

edit
Description Livid make these in 4 x 4 but I needed 3 x 8 and as not sure about the depth I need, so I fabbed up something that can be doubled-up. This is a custom spacer plate which holds the livid medium silicon buttons so that they are held firmly, they are set back a little and yet protrude through the plastic but are not snagged against the top plate sides. Its great having a Laser cutter at university. Rapid protoyping!
Date
Source Livid Button baseplates
Author c-g.

Licensing

edit
w:en:Creative Commons
attribution
This file is licensed under the Creative Commons Attribution 2.0 Generic license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
This image was originally posted to Flickr by c-g. at https://www.flickr.com/photos/44113611@N00/4481406200. It was reviewed on 9 May 2015 by FlickreviewR and was confirmed to be licensed under the terms of the cc-by-2.0.

9 May 2015

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current00:33, 9 May 2015Thumbnail for version as of 00:33, 9 May 20153,072 × 2,304 (3.13 MB)Clusternote (talk | contribs)Transferred from Flickr via Flickr2Commons

The following page uses this file:

Metadata