File:Poste détecteur électrolytique-fr.svg
Original file (SVG file, nominally 702 × 319 pixels, file size: 3 KB)
Captions
Summary edit
DescriptionPoste détecteur électrolytique-fr.svg |
Français : Circuit du poste à récepteur à détecteur électrolytique. Dès le début du XXe siècle. Une pile, un potentiomètre et un écouteur applique une tension au détecteur électrolytique. La polarisation électrolytique de l'anode est très rapide. L'anode est un fil de platine très fin de 1/100 de millimètre. Le signal alternatif du circuit inductance-condensateur dépolarise partiellement l'anode aux rythmes de la modulation d'amplitude, ce qui oblige la pile à fournir un nouveau courant pour repolariser l'anode. L'écouteur parcouru par ce courant repolarisant aux rythmes de la modulation d'amplitude et fait entendre une image de la modulation. ( La cathode est une plaque ou un gros fil de platine ou de plomb ). Le détecteur électrolytique fonctionne avec l'application d'une source auxiliaire bien déterminée entre 1,5 volt à 2,5 volts pour la fonction détectrice cathode anode. Pour le réglage du détecteur électrolytique, mètre la tension de la source auxiliaire au maximum environ: 2,5 volts. Dès que l'électrolyse de l'eau bouillonne, un bruit et perçu dans l’écouteur, réduire lentement la tension jusqu’à la disparition complète de tout bruit. Puis Connecter l’antenne. Refaire le réglage régulièrement et en cas de changement de température, en cas de changement de pression barométrique, en cas d’une vibration, en cas de choc…. Le détecteur électrolytique à une sensibilité de 7 nanowatts. Le détecteur électrolytique est seulement utilisable dans les stations fixes, instable aux vibrations, aux mouvements. Donc inutilisable dans les stations radios mobiles : navires, aéronefs, ballons dirigeables, stations portables...
Ce détecteur a été utilisé dans les récepteurs pour un usage à court terme en raison de son de la complexcité de l'entretien.
English: Circuit of an early radio receiver with electrolytic detector, from the very start of the 20th century. A battery and potentiometer apply a small bias voltage to the electrolytic detector. The electrolytic polarization of the anode is very fast. The anode is a very fine platinum wire 1/100 of millimetre in diameter, while the cathode is a lead or platinum plate or large wire. The alternating signal from the tuned circuit partially depolarizes the anode in response to the amplitude modulation, which draws a DC current from the battery which varies with the modulation, to repolarise the anode. This current passes through the earphone, which converts the audio current to sound. The electrolytic detector functions with a bias voltage of between 1.5 and 2.5 volts. To adjust it, the bias voltage is first adjustad to maximum, 2.5 volts. As soon as water bubbles indicate that electrolysis is occurring, and a noise is heard in the earphone, the bias voltage is slowly turned down until the noise completely disappears. Then the antenna is connected. The detector must be readjusted in the event of a change of temperature, barometric pressure, vibration, or shock. The electrolytic detector has a sensitivity of 7 nanowatts. It is unstable when subjected to movement or vibration, so it is only usable in fixed stations, not in portable or mobile radios, ships, aircraft, or airships. It was only used in early receivers for a short time due to its complexity of maintenance.
Русский: Схема включения электролитического амплитудного детектора |
Date | |
Source | File:Poste détecteur électrolytique.JPG by F1jmm |
Author | Д.Ильин: vectorization |
Other versions |
|
This SVG file contains embedded text that can be translated into your language, using any capable SVG editor, text editor or the SVG Translate tool. For more information see: About translating SVG files. |
Licensing edit
This file is made available under the Creative Commons CC0 1.0 Universal Public Domain Dedication. | |
The person who associated a work with this deed has dedicated the work to the public domain by waiving all of their rights to the work worldwide under copyright law, including all related and neighboring rights, to the extent allowed by law. You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission.
http://creativecommons.org/publicdomain/zero/1.0/deed.enCC0Creative Commons Zero, Public Domain Dedicationfalsefalse |
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 21:34, 6 February 2021 | 702 × 319 (3 KB) | Д.Ильин (talk | contribs) | Uploaded own work with UploadWizard |
You cannot overwrite this file.
File usage on Commons
The following 6 pages use this file:
File usage on other wikis
The following other wikis use this file:
- Usage on fr.wikipedia.org
Metadata
This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.
Width | 198mm |
---|---|
Height | 90mm |