File:Skateboard Ramp Plans Steel 4ft with deck.pdf
Original file (1,650 × 1,275 pixels, file size: 209 KB, MIME type: application/pdf)
Captions
Summary edit
DescriptionSkateboard Ramp Plans Steel 4ft with deck.pdf |
English: A sketch of prototype fabrication drawing for a 4 foot all-steel mini ramp. It is all welded construction of structural steel.
This ramp is designed to meet the following requirements: - The major sections can be fabricated in a welding shop (instead of welded at site). - The sections can be transported via standard (non wide-load) flat bed trailer. - The sections can be set at site by a forklift (instead of a crane). Once the sections are set, they will require final fit-up welding at site. Such a ramp is suited for a municipal skateboard park. The prototype is for a 4' mini ramp with deck. Each section is 8' wide and has one transition. Four such sections, welded together, would make a 16' wide mini ramp with 10' flat-bottom. The prototype drawing could be modified to make a spine ramp or to add bowl corners. The prototype could also be modified to make a taller mini ramp or vert ramp. E-mail: autox5011-ramp@yahoo.com |
Date | |
Source | Own work |
Author | Brock Damon Patterson |
Licensing edit
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 02:55, 25 January 2009 | 1,650 × 1,275 (209 KB) | Autox5011 (talk | contribs) | {{Information |Description={{en|1=A sketch of prototype fabrication drawing for a 4 foot all-steel mini ramp. It is all welded construction of structural steel. This ramp is designed to meet the following requirements: - The major sections can be fabric |
You cannot overwrite this file.
File usage on Commons
There are no pages that use this file.
Metadata
This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.
Short title |
|
---|---|
File change date and time | 07:28, 4 January 2009 |
Date and time of digitizing | 07:28, 4 January 2009 |
Software used | Qt 3.3.8b |
Conversion program | GPL Ghostscript 8.63 |
Encrypted | no |
Page size | 612 x 792 pts (letter) |
Version of PDF format | 1.4 |