File:US432260-Figure1.png
Original file (1,752 × 1,544 pixels, file size: 108 KB, MIME type: image/png)
Captions
Summary edit
DescriptionUS432260-Figure1.png |
English: Hydrocarbon-engine
Deutsch: Doppelkolbenmotor |
Date | |
Source | US Patent US432260, https://www.google.com/patents/US432260 |
Author | George B. Brayton |
Other versions |
|
Figure 1 is a longitufinal sectional elevation
Figure 2 is a top plan view
Figure 3 is a fragmentary sectional elevation
Figure 4 is a side elevation
Figure 5 is a horizontal section in the line x
Figure 6 is a vertical section of the burner
Figure 7 is a sectional elevation of the governor which controls the oil-pump
Figure 8 is a horizontal section of the lower portion of the governor and of the oil pump
Figure 9 is a vertical cross section of of the oil-pump in line w
Figure 10 is a sectional elevation of the safety valve
Figure 11 is a side elevation of the standard supporting of the crank-shaft
Figure 12 is a rear elevation of the same
Figure 13 is a horizontal section
Figure 14 is a side elevation of the standard with gearing removed
Figure 15 is a vertical section showing a modified construction of the spray-nozzle
Figure 16 is a horizontal section of the same
B vertical cylinder
B' combustion chamber
C cylinder-head
D walking beam arranged inside of the hollow base
D2 balance wheel
E cylindrical valve-casing
F rock-lever
G burner
H circular exhaust valve
I chamber
I' upper portion of the chamber I
J small condensing air-pump
K oil-pump
K' plunger
K2 slide-valve
K3 transverse pin
K4 longitudinal slot in the rod l
L2 centrifucal governor
M short shaft
N short rock-shaft
P port
b piston
b' automatic selfopening vale
b2 annular series of openings
b3 plate
b4 spring
b5 valve-stem
c water jacket
c' water jacket
d rockshaft
d' connecting rod (connecting d and b)
d2 standards
d3 standards
d4 connecting-rod
d5 opening in the base
e supply pipe
e'' bolts
e2 head
e3 reveiving-chamber
e4 head
e5 passage
e6 stem
e7 tube
e8 deflecting cup
e9 cover (finely perforated sheet metal or wire-gauze)
e10 convace disk
f oil and air induction valve
f' spring
f2 upwardly-extending valve-rod
f3 thumb-nut
f4 standard
g tube
g' plug
g2 bushing
g3 front chamber
g4 rear chamber
g5 perforated disk
g6 aperture
g7 incandescent medium
g8 annular flange
g9 passage
h upwardyl-extending sleeve
h' correspondingly-shaped seat
h2 exhaust chamber
h3 exhaust passage
h4 ports
h5 rods
h7 crossbar
h9 haust-pipe
i wick
i' branch passage
i2 needle-valve
i3 air-supply pipe
i4 cock
i5 vertical tube
i6 oil opening
i7 jet-pipe
i8 thumb-screw
j delivery-pipe
j' piston of the air pump
j2 pitman
j3 storage reservoir
j4 branch pipe
j5 safety-valve
j6 casing
j7 bow-spring
j8 annular flange
j9 adjusting-screw
l rod
l' rod (actuating the slide-valve)
l2 wedge
l3 vertical rod
l4 rock-lever
l5 link
l6 pulley
l7 belt
l8 spring
l9 a pipe which supplies oil
m eccentrics
m' eccentrics
m2 gear-wheel
m3 gear-wheel
m5 spring bolt
m5 recess
n elbow-lever
n' depending arm
n2 bell-crank
n3 vertical rod
n4 horizontal rod
n5 horizontal pin
n6 arm
o' short projection
o2 long projection
o3 upper arm
p flange
p' gate
p2 socket
p3 hand-lever
p4 extension
p5 stop
p6 glass disk
p7 central opening
p8 low screw-thimble
q steel cylinder
Public domainPublic domainfalsefalse |
The text and illustrations of US patents published before March 1, 1989 are in the public domain unless the patent text contains a specific notice that portions are copyrighted. See 37 CFR 1.71(d), 37 CFR 1.84(s)
The original patent contains no such notice, so its contents are in the public domain. Note: This only applies to images published before March 1, 1989. Patents published after that date are most likely copyrighted, unless in the public domain for another reason, such as {{PD-ineligible}}. |
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 11:20, 4 September 2016 | 1,752 × 1,544 (108 KB) | MichaelFrey (talk | contribs) | {{Information |Description ={{en|1=Hydrocarbon-engine}} {{de|1=Doppelkolbenmotor}} |Source =US Patent US432260, https://www.google.com/patents/US432260 |Author =George B. Brayton |Date =16. Jan. 1890 |Permission = |othe... |
You cannot overwrite this file.
File usage on Commons
There are no pages that use this file.
File usage on other wikis
The following other wikis use this file:
- Usage on en.wikipedia.org
Metadata
This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.
Horizontal resolution | 118.11 dpc |
---|---|
Vertical resolution | 118.11 dpc |
File change date and time | 11:12, 4 September 2016 |