Wikimedia Commons

File:Arduino-based wow-and-flutter meter as-built.jpg

Original file ‎(4,173 × 3,365 pixels, file size: 2.92 MB, MIME type: image/jpeg)

Captions

Captions

Arduino-based wow-and-flutter meter - as-built photo

Summary

edit
Description
English: Arduino-based wow-and-flutter meter - as-built photo. Testing DSP procedures. The input is connected to an internal oscillator that modulates 3120 Hz carrier with a square 4Hz clock with +/- 1.25% modulation spread. Which is exactly what shows on the LCD owing to the robustness of DSP math (W-number is for wideband, N-number for narrowband chaneels per DIN 45507; with this test signal they must almost match). The odd values of F and delta-F result from the use of a crude 8-bit timer. The only 16-bit timer is busy measuring the input signal period. The Arduino has more than enough speed to calculate the DSP filters, however, its clock speed and the resolution of its 16-bit timer are barely sufficient for the job. Ideally, it needs 24-bit or better timer with much higher clock speed than the stock 16 MHz.
Русский: Измеритель детонации (магнитофонов и ЭПУ) на основе ардуино. Внешний вид. На этом фото измерительный вход подключен к выходу генератора, несущая которого (примерно 3120 Гц) модулируется меандром частотой 4 Гц (опорная по DIN45507) с девиацией частоты +/- 1.25% - что и отображается на экране (для широкополосного W и узкополосного N каналов измерения). Странные значения несущей и девиации - следствие использования в качестве генератора 8-битного таймера (единственный 16-битный таймер занят измерениями). Производительность 16-мегагерцовой ардуины более чем достаточна для задач простейшего DSP, но тактовая частота и разрешение 16-битного таймера еле-еле пригодны для измерений. Приходится решать непростой компромисс между разрешением и качеством АЧХ, высокочастотная ветвь которой так или иначе будет значительно отклоняться от ГОСТа 11948-78 (он же DIN 45507).
Date
Source Own work
Author Retired electrician
Other versions
Schematic
DSP flowchart

Licensing

edit
I, the copyright holder of this work, hereby publish it under the following license:
Creative Commons CC-Zero This file is made available under the Creative Commons CC0 1.0 Universal Public Domain Dedication.
The person who associated a work with this deed has dedicated the work to the public domain by waiving all of their rights to the work worldwide under copyright law, including all related and neighboring rights, to the extent allowed by law. You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:38, 1 June 2023Thumbnail for version as of 12:38, 1 June 20234,173 × 3,365 (2.92 MB)Retired electrician (talk | contribs)Uploaded own work with UploadWizard

You cannot overwrite this file.

There are no pages that use this file.

Metadata

This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it. If the file has been modified from its original state, some details such as the timestamp may not fully reflect those of the original file. The timestamp is only as accurate as the clock in the camera, and it may be completely wrong.

Retrieved from "https://commons.wikimedia.org/w/index.php?title=File:Arduino-based_wow-and-flutter_meter_as-built.jpg&oldid=801139780"