User:Jack who built the house/مناقشات ملائمة
مناقشات ملائمة (CD) هي أداة جافا سكريبت تضيف غلافًا على نظام نقاش ميدياويكي الحالي الذي يعزز تجربة المستخدم مع صفحات النقاش بطرق متعددة.
المميزات
- نشر وتحرير التعليقات دون التبديل إلى صفحة منفصلة
- @mentions و nowiki #comment links و wikilinks و Template:قوالب والوسوم / الإكمال التلقائي ل nowiki
- نقلا عن التعليقات مع الحفاظ على التنسيق
- الملء التلقائي لملخص التحرير مع الإشارة إلى المرسل إليه للتعليق
- حفظ مسودات التعليقات لاستعادة محتوى النماذج بعد أحداث غير متوقعة مثل تعطل المتصفح
- إنشاء المواضيع والأقسام الفرعية
- صفحات نقاش معاد تصميمها، مع عرض المؤلف والتاريخ أعلى التعليقات (الاشتراك) وخطوط رفيعة تشير إلى المواضيع
- التعامل مع قوالب 'المسافة البادئة'
- نقاشات قابلة للطي (وقابلة للطي التلقائي)
- تعليق الطوابع الزمنية بالتوقيت المحلي والتنسيق العالمي، حسب الحالة
- تسليط الضوء على التعليقات الجديدة والتنقل فيها (عبر لوحة التنقل أو جدول المحتويات)
- تسليط الضوء على التعليقات الخاصة
- التحقق من وجود تعليقات جديدة في الخلفية وتقديم تعديلات بسيطة للتعليقات تلقائيا
- الاشتراك في المواضيع، مما يؤثر على الإخطارات وتسليط الضوء على المواضيع في عدة أماكن (استنادا إلى أدوات المناقشة)
- إشعارات سطح المكتب حول الردود على تعليقات المستخدم وتعليقاته في الموضوعات التي اشترك فيها المستخدم في الصفحات المفتوحة (الاشتراك)
- نقل المواضيع بين صفحات النقاش
- الشكر على التعديلات التي أضافت التعليقات
- نسخ الروابط إلى التعليقات
- القفز إلى تعليق معين من قائمة المراقبة والصفحات الأخرى التي تسرد المراجعات
- رؤية اسم القسم الحالي دائما والتنقل في أجزاء الصفحة بنقرة واحدة
- البحث عن التعليقات والأقسام في الأرشيف
The script makes the user forget about:
- the need to search the code for a place for a comment, count colons, type tildes and other markup;
- edit conflicts;
- reading talk pages through diffs;
- the need to completely reload the page and look for new comments with eyes, or even check the watchlist;
- the need to convert UTC dates to local time.
التنصيب
To install the script for all Wikimedia wikis, add this to your global.js on Meta:
mw.loader.load('https://commons.wikimedia.org/w/index.php?title=User:Jack_who_built_the_house/convenientDiscussions.js&action=raw&ctype=text/javascript');
To install the script on a specific wiki where it's not a gadget, add the same code to your common.js. If the wiki has the script as a gadget, activate it in user preferences. Even if you have the script installed globally, it would make sense to add the gadget—the script would load faster on that wiki.
Every wiki has its own peculiarities that the script can address in the configuration file. Those are individual for each wiki and created by volunteers. If you know JavaScript and your wiki doesn't have one, see § Configuring for a wiki. Having a configuration file for the wiki will also speed up the execution of the script.
Compatibility
Convenient Discussions shows timestamps in local time by default. However, you can use another user script for this purpose. To make Convenient Discussions compatible with the script displaying time in the local time zone (w:User:Gary/comments in local time.js or w:User:Mxn/CommentsInLocalTime), call the latter like this:
mw.hook( 'convenientDiscussions.commentsReady' ).add( function () {
// Import the script here
} );
Note that this will not load the script if Convenient Discussions doesn't load. To make the script also load for pages Convenient Discussions won't load on, call it like this:
if (
mw.config.get( 'wgNamespaceNumber' ) % 2 !== 1 &&
!mw.config.get( 'wgExtraSignatureNamespaces' ).includes( mw.config.get( 'wgNamespaceNumber' ) )
) {
// Import the script here
}
For Gary's script specifically, an additional line of code is needed to disable its feature of not loading twice:
mw.hook( 'convenientDiscussions.commentsReady' ).add( function () {
window.commentsInLocalTimeWasRun = false;
mw.loader.load( '//en.wikipedia.org/w/index.php?title=User:Gary/comments in local time.js&action=raw&ctype=text/javascript' ); // [[w:en:User:Mxn/CommentsInLocalTime]]
}
Be sure to disable the "Comments in Local Time" gadget in your preferences if it is present in your wiki (e.g. the English Wikipedia). Also remember to stop Convenient Discussions from
الاستخدام
You can adjust the script according to your preferences in the settings dialog. It is available at the click of the gear icon which can be found in the "CD" section of the watchlist and under any comment form.
The hotkeys can be found at the click of the "?" button under any comment form and on hover over the navigation panel buttons.
Comment types
Navigation panel
الأسئلة الشائعة
- The script doesn't work on a page where it should work / works on a page where it shouldn't work. How to fix it?
- The script uses a number of factors to determine whether it should process a certain page, such as the presence of the "Add topic" tab and the
wgExtraSignatureNamespaces
config value. The simplest way to make it process/not process a page is to click "Run Convenient Discussions on this page once" in the page footer. But that will work only for one time. You should contact the user maintaining the configuration file on your wiki or create your own configuration file according to the instructions below. In that file, regular expressions to match page names should be added to/removed from thepageWhitelist
/pageBlacklist
values. A worse way to deal with it is to add an element withclass="cd-talkPage"
orclass="cd-notTalkPage"
to the source code of the page. In that case, the page will still be classified incorrectly on log pages (the watchlist, history pages etc.).
- What does "(-)" after the comment text in an edit summary mean?
- It means that the whole text of the comment is displayed in the edit summary, and there is no more text in the comment other than that is displayed, so no point to open the page if you only want to see the contents of this edit. It's a notation that was used on some old Internet forums.
- The comment menu (Reply/Edit/Thank/...) overlaps a user link, and I can't click it.
- Make a long click/tap or right click on the block; it will disappear.
- How to set settings for one wiki, not for all wikis?
- Use
var cdLocalSettingName = value;
in your common.js on that wiki. You can get the names of the settings here (the first letter should be in upper case, for exampleautopreview
→cdLocalAutopreview
).
- I would like to have
:
inserted after a user mention like in the {{Ping}} template. - Hold Ctrl while choosing the name you want to mention. You can also press the mention icon while holding Ctrl — if you're replying to a comment, a mention of the target comment's author with
:
will appear at the beginning of your comment.
Data
Here's what the script stores, why, how, and how to delete the data. Note that you can delete all the data associated with the script in one click, by opening the script settings and pressing the button "Remove all script data" on the "Data removal" tab. Note that while the settings (except for a few) are global, visits and watched sections are stored individually for each wiki, so you'll have to remove them separately.
What | Why | How | How to delete[1] |
---|---|---|---|
Settings | To allow tuning the script according to the user's preferences. | On the Wikimedia servers as a user option named userjs-convenientDiscussions-settings .
|
Global settings: new mw.Api().postWithEditToken({
action: 'globalpreferences',
optionname: 'userjs-convenientDiscussions-settings',
});
Local settings: new mw.Api().saveOption('userjs-convenientDiscussions-localSettings', null);
|
Last talk page visits | To detect new comments on talk pages. | In compressed form, on the Wikimedia servers as a user option named userjs-convenientDiscussions-visits .[2]
|
new mw.Api().saveOption('userjs-convenientDiscussions-visits', null);
|
Watched sections | (Only when enabled in the settings instead of the standard topic subscription.) To show notifications and highlight comments on pages that list revisions: the watchlist, recent changes page, history pages, user contributions pages. | In compressed form, on the Wikimedia servers as a user option named userjs-convenientDiscussions-watchedSections .[2]
|
Using the "Edit watched sections list" dialog accessible from the watchlist, or new mw.Api().saveOption('userjs-convenientDiscussions-watchedSections', null);
|
Unsent comment forms' content | To restore comment drafts after page reloads, browser crashes, accidental jumps to a different page etc. | For no longer than 60 days, in the browser's local storage. | localStorage.removeItem('convenientDiscussions-commentForms');
|
Edits thanked via CD | To reflect in the interface that a comment has already been thanked for. | For no longer than 60 days, in the browser's local storage. | localStorage.removeItem('convenientDiscussions-thanks');
|
Seen comment changes | When a comment is updated, its new version is sometimes rendered immediately. If the user has seen the update, this fact is saved in the memory, so that there is no notification the next time the user sees it. | For no longer than 60 days, in the browser's local storage. | localStorage.removeItem('convenientDiscussions-seenRenderedChanges');
|
- ^ To execute the code in the "How to delete" column, open the browser's developer tools (done by pressing F12 in most browsers), switch to the "Console" tab, paste the code into the input and press ↵ Enter.
- ^ In Russian Wikipedia, for historical reasons, the option names use
cd
instead ofconvenientDiscussions
, anduserjs-cd-watchedTopics
is used for the watched sections option.
Note that other scripts that you use on wiki pages, as well as side-wide scripts, have access to this data too.
Feedback
It's best to post bug reports and proposals on Phabricator under the "convenient-discussions" tag. If you don't have an account there and don't want to create one, post to the talk page.
Credits
Convenient Discussions started in 2018 as Russian Wikipedia's user script. It is being developed by Jack who built the house, enriched by the contributions and feedback from the global Wikimedia tech community and users. It also borrows the code for parsing timestamps in different formats from Matma Rex and uses solutions and ideas from the Wikimedia engineering and design teams.
Configuring for a wiki
The scheme of loading the script on a wiki is the following: There is the main script file on Commons and a configuration file on the wiki (if somebody has created it). The configuration file can be a gadget or a user script (a gadget will load faster).
- The configuration file requests the main script file if it is not loaded yet.
- Conversely, if the main file is loaded first, it requests the configuration file if the URL of the configuration file is specified in it.
So, there is no difference which file is loaded first.
To configure the script for a wiki, you may use the configuration generator as described below and then supplement it with configuration values you want. If you want the configuration file to be loaded when users load the script from Commons, you should contact the repository owner. If it proves safe, he will add the URL of the configuration to config/urls.json (you can make a pull request too).
mw.loader.load('https://commons.wikimedia.org/w/index.php?title=User:Jack_who_built_the_house/convenientDiscussions-generateBasicConfig.js&action=raw&ctype=text/javascript');
The meaningful part of the configuration is contained in the convenientDiscussions.config
object. Its possible properties are documented here with default values, alphabetically. The source code of that documentation has them in a more logical order.
It is recommended to keep only those properties that differ from the default ones.
You can also add any additional instuctions (for example hooks) you need below the object.
Examples
- w:en:User:Jack who built the house/convenientDiscussions.js (source in the repository)
- w:ru:MediaWiki:Gadget-convenientDiscussions.js (source in the repository)
How do I turn off the "Reply" buttons?
To prevent the "Reply" buttons and the rest of the comment layout from showing up in certain templates used on talk pages (e.g. in the "Moved discussion" template after the mover's signature), add the mw-notalk
class to those templates.
To prevent the "Reply" buttons from showing up in closed discussions, add the mw-archivedtalk
class to the template.
Debugging using Node.js and Git
If you want to debug your configuration more closely in the browser's development tools and you're familiar with Node.js and Git and have them installed, clone the script's repository, run npm install
while in the script's directory to install the dependencies, create a .js
file in the config
folder named using pattern project_code[-language_code].js
(for example, w-en.js
, wikt-de.js
, mw.js
), and put the following code into it:
export default {
// List of properties
};
// Any additional code, e.g. hooks
Then you will need to add the code as described above. After the configuration is ready, you will need to build an actual configuration file that you will put in your wiki. Do it by running npm run configs
. The resulting file will be named dist/convenientDiscussions-config/filename
.
Test your configuration file by running npm run single -- project=project_code lang=language_code
. A file named convenientDiscussions-single-project_code[-language_code].js
will be created (and updated on code changes) in the dist
folder. Load it to the wiki using mw.loader.load('http://localhost:9000/filename')
.
It will be best if you make a pull request to include your configuration in the CD repository. This way, if something in the script environment changes that affects your configuration file (the format of a property changes, for instance, or a default value, that your value is based on, is updated), other people including the maintainer of the script would be able to notice it and inform you and/or make changes themselves.
Development
- GitHub repository is used to store code. GitHub Actions is used to build and deploy the resulting files to wikis, as well as docs to Toolforge.
- Phabricator tag is used to coordinate efforts. (Post bug reports and proposals there, not at GitHub.)
- Toolforge has automatically generated code documentation.
- Translatewiki has localization strings. Please suggest improvements to the English source through a pull request to en.json.
Your contributions are welcome! You can either improve the script itself or write plugins for it. Some notes:
- The global object of the script is
convenientDiscussions
(the modules use thecd
alias). convenientDiscussions.s()
is an analog ofmw.msg()
for the script's language strings.convenientDiscussions.sParse()
is an analog ofmw.message(...).parse()
. Please make sure all strings that have their raw HTML inserted into the page useconvenientDiscussions.sParse()
to prevent introducing XSS vulnerabilities. (All code from untrusted sources is sanitized at earlier stages, but a double check won't hurt.)- The "events" in the left panel of the documentation correspond to the names used by
mw.hook
. For example, to attach a handler to thecommentFormCreated
event, you need the codemw.hook('convenientDiscussions.commentFormCreated').add(handler);
. - To see message names instead of messages themselves on a page, add the uselang=qqx parameter to the end of the URL (just like with MediaWiki).
- If you write a plugin and need some internal method to be available publicly via the global object, contact the script's maintainer (or just make a relevant pull request).
- So far there are very few automatic tests (although it would be great to have more); most testing should be carried out manually. Some common test cases for comment detection and adding/editing comments are collected at User talk:Jack who built the house/CD test cases.
Building
Use:
npm run start
to serve the script from http://localhost:9000/convenientDiscussions.dev.js and automatically rebuild on updates. Wiki configuration and translation will still be loaded from web.npm run single -- project=project_code lang=language_code
to serve the script as a single file. Useful to debug configuration and translation.npm run build
to build the main file, source maps, project configuration files, translation files, and license file. Use--test
to build the files with the-test
postfix.npm run docs
to generate documentation from JSDoc comments.npm run configs
to generate wiki configuration files. Use--test
to generate the files with the-test
postfix.npm run deploy
to deploy the built files (including wiki configurations) to wikis as configured inconfig.json5
. Use--test
to deploy the test versions.