File:BWR Mark I Containment sketch.png
Size of this preview: 581 × 599 pixels. Other resolutions: 233 × 240 pixels | 465 × 480 pixels | 826 × 852 pixels.
Original file (826 × 852 pixels, file size: 58 KB, MIME type: image/png)
File information
Structured data
Captions
Summary edit
DescriptionBWR Mark I Containment sketch.png |
English: Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors.
Deutsch: Schema eines Siedewasserreaktors (SWR) der Baulinie Mark I mit Sicherheitsbehälter aus Beton und torusförmiger Kondensationskammer aus Stahl, wie sie auch in Reaktoren der Baulinie SWR/1,SWR/2, SWR/3 und in einigen der Baulinie SWR/4 vorkommen.
Français : Diagrame/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4.
|
Date | |
Source | Sketched in Paint.net using 826 x 852 canvas inspired by Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757. The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus. |
Author | User:84user |
Other versions |
|
Licensing edit
Public domainPublic domainfalsefalse |
This work has been released into the public domain by its author, 84user. This applies worldwide. In some countries this may not be legally possible; if so: 84user grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law. |
329
273
96
321
826
852
reactor pressure vessel
314
382
16
231
826
852
Cylindrical biological shield
332
277
92
34
826
852
Top head assembly
215
94
462
67
826
852
Gantry crane
311
167
135
80
826
852
Drywell head and refueling assembly
233
240
293
518
826
852
"Inverted lightbulb" drywell containment chamber
208
34
474
199
826
852
Upper part of building housing crane and refueling assembly
92
683
567
138
826
852
Wetwell torus holding water for steam suppression
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 03:50, 15 March 2011 | 826 × 852 (58 KB) | Theanphibian (talk | contribs) | Add spent fuel pool. | |
21:34, 14 March 2011 | 826 × 852 (61 KB) | 84user (talk | contribs) | == Summary == {{Information |Description = {{en|1=Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. This }} {{fr|1=Diagrame/coupe d'un r |
You cannot overwrite this file.
File usage on Commons
The following 3 pages use this file:
File usage on other wikis
The following other wikis use this file:
- Usage on eo.wikipedia.org
- Usage on fr.wikipedia.org
- Usage on no.wikipedia.org
- Usage on simple.wikipedia.org