Wikimedia Commons

File:BWR Mark I Containment sketch primary.png

Original file ‎(826 × 852 pixels, file size: 41 KB, MIME type: image/png)

Captions

Captions

Add a one-line explanation of what this file represents

Summary edit

Description
English: Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. The primary containment is outlined in purple.
  • DW = Drywell
  • WW = Wetwell
  • SF = Spent Fuel Pool
  • light blue with pink dome = Reactor Pressure Vessel
  • purple = Secondary Concrete Shield Wall
Français : Diagramme/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4.
Español: Diagrama/corte esquemático de un reactor de agua en ebullición tipico del tipo Mark I con recinto de contención en hormigón con toro subyacente en acero, como los utilizados en los reactores de tipo BWR/1, BWR/2, BWR/3 y algunos BWR/4.
Català: Esquema d'un reactor d'aigua en ebullició (BWR, Boiling water reactor) de tipus Mark I amb contenció de formigó i torus d'acer incloent baixants, com els utilitzats en els models de reactor BWR/1, BWR/2, BWR/3 i alguns BWR/4.
  • DW = Pou sec
  • WW = Pou moll
  • SF = Piscina del combustible gastat
Date
Source Sketched in Paint.net using 826 x 852 canvas inspired by Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757. The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus.
Author User:84user
Other versions
  • original diagram from page 15 of the source
    original diagram from page 15 of the source
  • sketch without downcomers
    sketch without downcomers
This technology image could be re-created using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name}}.


It is recommended to name the SVG file “BWR Mark I Containment sketch primary.svg”—then the template Vector version available (or Vva) does not need the new image name parameter.

Licensing edit

Public domain This work has been released into the public domain by its author, 84user. This applies worldwide.
In some countries this may not be legally possible; if so:
84user grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:54, 4 April 2011Thumbnail for version as of 12:54, 4 April 2011826 × 852 (41 KB)84user (talk | contribs)== {{int:filedesc}} == {{Information |Description = {{en|1=Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. The pr

You cannot overwrite this file.

Retrieved from "https://commons.wikimedia.org/w/index.php?title=File:BWR_Mark_I_Containment_sketch_primary.png&oldid=814441500"